Table of Contents
Advertisement
Connecting to a WLAN
NOTE:
When you are setting up Internet access in your home, you must establish an account with an
Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will
help set up the modem, install a network cable to connect your wireless router to the modem, and test the
Internet service.
To connect to a WLAN, follow these steps:
1.
Be sure that the WLAN device is on.
2.
On the taskbar, right-click the network status icon, and then connect to one of the available networks.
If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Enter the code, and
then select Next to complete the connection.
NOTE:
NOTE:
1.
On the taskbar, right-click the network status icon, and then select Open Network and Sharing
Center.
2.
Select Set up a new connection or network.
A list of options is displayed, allowing you to manually search for and connect to a network or to
create a new network connection.
‒ or –
1.
On the taskbar, right-click the network status icon, and then select Network & Internet Settings.
2.
Under the Network & Internet Status section, select Network and Sharing Center.
3.
Select Set up a new connection or network.
A list of options is displayed, allowing you to manually search for and connect to a network or to
create a new network connection.
3.
Follow the on-screen instructions to complete the connection.
After the connection is made, right-click the network status icon at the far right of the taskbar, to verify the
name and status of the connection.
NOTE:
The functional range (how far your wireless signals travel) depends on WLAN implementation, router
manufacturer, and interference from other electronic devices or structural barriers such as walls and floors.
18
Chapter 3 Connecting to a network
If no WLANs are listed, you may be out of range of a wireless router or access point.
If you do not see the WLAN you want to connect to:
Advertisement
Table of Contents
