Advertisement
Quick Links
ITEM # : W70CSP
Assembly Instructions
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts. www.walkeredison.com
Revised 03/2017
Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
P.1
Advertisement
Related Manuals for Walker Edison W70CSP
Summary of Contents for Walker Edison W70CSP
- Page 1 ITEM # : W70CSP Assembly Instructions Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 03/2017 Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 5 Insert dowels (A) into panel (2). Screw cam bolts (B) into panels (1,2). Insert dowels (A) into slats (6,7). Screw cam bolts (B) into slats (15).
- Page 6 Insert dowels (A) into panels (3,4,5). Insert dowels (A) into legs (11,12,13,14) . Screw cam bolts (B) into legs (11,12,13,14).
- Page 7 Attach legs (11,13) to panel (3) using cam bolts and dowels as guides. Insert cam locks (C) into panel (3) and tighten with a screwdriver. Attach legs (12,14) to second panel (3) using cam bolts and dowels as guides. Insert cam locks (C) into panel (3) and tighten with a screwdriver.
- Page 8 Attach slat (7) to panel (2) using cam bolt as guides. Insert cam lock (C) into slat (7) and tighten with a screwdriver. Secure screw (L) to slat (7) to panel (2). Attach support legs (8) to panel (2) using bolts (D). Tighten bolts (D) with wrench (H).
- Page 9 Attach slat (15) to panel (4) using cam bolts and dowel as guides. Insert cam locks (C) into panel (4) and tighten with a screwdriver. Attach slat (15) to panel (5) using cam bolts and dowel as guides. Insert cam locks (C) into panel (5) and tighten with a screwdriver.
- Page 10 Attach panel (4,5) to panel (2) using bolts (D). Tighten bolts (D) with wrench (H). Attach slat (6) to slats (15) using dowel as guide.
- Page 11 Attach panel (3) with legs (12,14) to the assembly from the previous step using cam bolts and dowels as guides. Insert cam locks (C) into panel (2) and slat (6) and tighten with a screwdriver. Attach second panel (3) with legs (11,13) to the assembly from the previous step using cam bolts and dowels as guides.
- Page 12 Carefully slide panels (10) into place along the back of the assembly. Carefully attach panel (1) to the assembly using cam bolts and dowels as guides. Insert cam locks (C) into the assembly as shown above and tighten with a screwdriver. Secure screw (L) to slat (6) to panel (1).
- Page 13 Secure panels (10) with plastic wedges (E) and screws (F). Cover all visible cam locks with stickers (K) as desired.
- Page 14 Insert shelf support pins (G) into the assembly at desired shelf heights. Carefully place shelves (9) on shelf support pins (G).