Page 5
Disassemble drawer slider (P) by sliding the slider arm and slider bracket apart. Depress the small lever of the slider bracket and carefully pull the two pieces apart. Repeat this process for both drawer sliders (P).Secure slider arm (P) to panel (5,6) and drawer panel 5,16) with screw (Q).
Page 6
Insert wooden dowel (A) into side panel (3,4,5,6) and secure cam bolt (B) to side panel (3,4,5,6). Also secure cam bolt(B) to the opposite side panel (5,6)
Page 7
Insert wooden dowel (A) into part (7,8). Insert wooden dowel (A) into part (18), Secure cam bolt (B) to top panel (1). Secure cam bolt (B) to drawer part (13),...
Page 8
Secure cam bolt (C) to fixed shelf (7). Secure cam bolt (C) to side panel(3,5),...
Page 9
Using cam lock (C) secure panel (8) and attach panel (5,6).
Page 10
Using cam lock (C) secure panel (7) and attach panel (4,6).
Page 11
Use Hex key(N) to secure bottom panel (2) to side panel (3,4,5,6) with bolt (E)
Page 12
Slide back panels (19) into grooves as per diagram.
Page 13
Insert top panel (1) into side panel (3,4,5,6), then insert and secure cam lock (C) to side panel (3,4,5,6) to lock it.
Page 14
Secure plastic wedge (F) to back panel (19) with screw (G).
Page 15
Attach handle (R) using black screw (S) to part (9,10,13), hinge (H) using screw (J) to part (9,10) with screwdriver.
Page 16
Secure drawer side panel (15,16) and part (18) to drawer back panel (14) with screw (K), Slide drawer bottom panel (17) into grooves as per diagram. Insert drawer front panel (13) into side panel (15,16) and part (18), then insert and secure cam lock (D) to side panel (15,16) and cam lock (C) to part (18) to lock it,...
Page 17
Place door hinge (H) to part (3,4) using screw (J)
Page 18
Place sticker (L) over holes as per diagram...