Related Manuals for Walker Edison W70FENSMD
Summary of Contents for Walker Edison W70FENSMD
- Page 1 W70FENSMD Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 27/07/2020(C) Walker Edison ® © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
-
Page 2: General Assembly Guidelines
A Phillips head screwdriver is required for the assembly of this product . VII. Power tools should not be used to assemble this product. VIII. Drill may be needed for securing product to wall. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. -
Page 3: Parts List
Parts List © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. -
Page 4: Hardware List
Glue tube Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. - Page 5 Step 1 Secure cam bolt (A) into part (1) with Philips head screwdriver as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 6 Step 2 Insert wooden dowel (B) into parts (5,6,7,8) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 7 Step 3 Using Cam lock(C) secure parts (5,6) to part (1) with Philips head screwdriver as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 8 Step 4 Using Cam lock(C) secure parts (7,8) to part (1) with Philips head screwdriver as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 9 Step 5 Put parts (3,4) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 10 Step 6 Using screw (E) attach part (2) into parts (5,6,7,8) with Hex key (J) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.10...
- Page 11 Step 7 Using Bolt (F) attach part (13) to part (14),then using bolt (F) attach part (13) to part (14) with Hex key (J) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.11...
- Page 12 Using bolt (F) attach part (13) to part (2) with Hex key (J) ,then using screw (G) attach part (15) to part (2) with Philips head screwdriver as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.12...
- Page 13 Step 9 Using bolt (H) attach part (13) to parts (5,8) with Hex key (J) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.13...
- Page 14 Step 10 Using screw (K) secure plastic wedge (L) with Philips head screwdriver as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.14...
- Page 15 Step 11 Place sticker (D) cover the holes as per diagram . © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.15...
- Page 16 Step 12 Place part (12) to part (11) ,then using screws (M,R) secure part (11) to part (12) with Philips head screwdriver as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.16...
- Page 17 Step 13 Using screw (N) attach Pulley (Q) to part (12) with Philips head screwdriver as per diagram. © P.17 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 18 Step 14 Please kindly note that you can adjust the height of the wheels to make the door keeping good fit by adjusting the screw as per diagram. © P.18 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 19 Insert the upper pins of part (11) into the groove of part(1) .Lift up the door in vertical position with the bottom panel (2) ,lay down the door and keep the wheels matching with the track in bottom panel as per diagram . © P.19 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 20 Insert the upper pins of part(11) into the groove of part(1) .Lift up the door in vertical position with the bottom panel (2) ,lay down the door and keep the wheels matching with the track in bottom panel as per diagram . © P.20 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 21 Step 17 Slide the doors (11) to the left and right .If necessary , re-assemble the doors for a good fit and sliding smoothly. © P.21 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 22 Step 18 Please kindly note that you can adjust the height of the wheels to make the door keeping good fit by adjusting the screw as per diagram. © P.22 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 23 Step 19 Slide the doors (11) to the left and right .If necessary , re-assemble the doors for a good fit and sliding smoothly. © P.23 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 24 (P) in the same level. So the shelf is not titled .Put parts (9,10) into unit as per diagram. Tilt and rest the adjustable shelves (9,10) onto the shelf support pins . © P.24 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 25 Step 21 Slide the doors (11) to the left and right as per diagram. © P.25 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 26 (P) in the same level. So the shelf is not titled .Put part (10) into unit as per diagram. Tilt and rest the adjustable shelf (10) onto the shelf support pins . © P.26 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 27 Step 23 Position the assembled unit at the desired location ,if necessary adjust the floor leveler at the bottom of the support leg to level the unit . © P.27 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 28 Step 24 Using screw (G) attach Velcro strap (T) into part (1) with Philips head screwdriver as per diagram. © P.28 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 29 Wall Using screw (S) attach Velcro strap (T) into Nut (U) to wall with Philips head screwdriver as per diagram. © P.29 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
-
Page 30: Final Assembly
Step 26 Final Assembly © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.30...