Table of Contents
Advertisement
PLAYING BACK DVD/USB/CARD
For trouble free operation of SD CARD/USB or DVD disc play. Please ensure
that the following steps are taken before inserting an SD card, USB or DVD
disc:
DVD Playback
. Press source button and select DVD/USB/CARD function.
. Allow 0 seconds before inserting a DVD disc ensuring that the label side
is facing you.
SD CARD/USB Playback
.Press the Source button and select DVD/USB/CARD function.
. Press the USB/CARD button on the remote.
. Now Insert a Card (Label side facing you) or USB cable.
Note: If DVD has been previously played its important that the disc is
removed and that the USB/CARD button on the remote is pressed before
inserting a card or USB cable. Failure to do so will result in the card /USB
failing to be read and shown on the monitor.
DVD Supports following formats:
. MP (CVR/VBR) bite rate range : kbps~0kbps.
WMA bite rate range: 6kbps~kbps (Sample Rate)
. JPG picture maximum resolution:
Baseline JPG: 07X08
Progressive JPG: Width x (High+8)<00000
. MPEG:
Version: DivX. /DivX.xx/DivX.xx/DivX6.0,
Video source resolution: PAL<=70x76, NTSC<=70x80.
. *.MPG, *.DAT MPEG video format, same as VCD.
Note:
a). When switching between TV and DVD it is necessary to press the source
select button until the DVD function indicator is seen on the screen.
b). For best performance, when viewing Jpeg (.Jpg) pictures via a flash
memory device connected through the USB socket, adjacent pictures
should be of the same resolution otherwise they may not display properly.
USING THE FEATURES
Advertisement
Table of Contents
