Table of Contents
Advertisement
USING THE CARD READER & USB
The Smart NAVI Viewer allows you to play JEPG/MPEG/MPEG/MP/MPEG files in a SD
storage card on your LCD TV.
TO INSERT A SD CARD
Be sure to insert the SD card in the correct orientation. If the SD card is forced in the
wrong way, it may cause damage.
TO REMOVE A SD CARD
When removing the SD card, please pull it from its slot.
. Turn your LCD TV on.
. Select Source to DVD.
. Insert a SD card that contains JEPG/MPEG/MPEG/MP/MPEG files.
. Press "CARD" button on the remote control to enter Card Reader Mode
. Press▲/▼button on the remote control to select the file you want to play,
and then press "OK" button to play the file.
NOTE:
. The card socket and the DVD player cannot be used simultaneously, so please
insert either a card or a disc, not both at once.
. If you want to view the DVD program or turn USB file on,
please press "CARD" button to switch it.
USB (Universal Serial Bus)
Connect a USB devise via a USB cable to the USB slot, and press USB/CARD button on
the remote to switch to USB playing status. And the TV screen will show the USB menu.
The playing interface and operation methods are alike MP,MP,JPEG files.The playing
interface is according to the content of your saved file.
8
USING THE FEATURES
VOL .
CH .
MENU
SOURCE
POWER
.
Advertisement
Table of Contents
