Related Manuals for Goodmans GTVL19W17HD
Summary of Contents for Goodmans GTVL19W17HD
- Page 1 TV/SCART VOL. BACK SLEEP I-II CH. LIST COLOUR S.MODE P.MODE P.SIZE EXIT MENU INFO INPUT FAST TEXT...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
- Page 3 MAINS PLUG WIRING Electrical Information This appliance is fitted with a BS1363/A 13 amp plug. If it is not suitable for your supply sockets it must be removed and replaced with an appropriate plug. If the plug becomes damaged and/or needs to be replaced please follow the wiring instructions below.
- Page 4 WARNINGS Unqualified attempts to repair this TV are not allowed. Refer repairs to this unit to a qualified technician only. Do not disassemble this unit. There are dangerous-voltage parts inside that may cause electric shock even after power is disconnected. Store your unit in a clean, dry environment, Unplug the unit immediately it gets wet, and consult your servicing technician.
-
Page 5: Table Of Contents
CONTENT PREPARATION ......................Features ................................Package Contents ............................... 6 LCD TV .................................. 7 Front View ................................7 Rear View ................................8 Remote Control ............................... 9 Setting up your LCD TV............................12 Using your LCD TV............................... 13 INSTALLATION ......................Connecting a TV Cable or Aerial......................... 14 Connecting a DVD Player .......................... -
Page 6: Preparation
PREPARATION Features Features High Brightness / Contrast Image Brightness: 450 cd/m Contrast Ratio: 800:1 VGA Support: 640x480/60Hz~1024x768/75Hz Multimedia socket VIDEO in socket S-VIDEO in socket SCART socket (RGB, CVBS ,CVBS+RGB,Y/C input/ CVBS output) Y Pb Pr in socket VGA in socket HDMI in socket WSS (Wide Screen Scale ) Function This function can automatically convert and display any aspect ration (4:3 / Wide) TV... -
Page 7: Package Contents
Package Contents Once you open the box, make sure all of the following contents are included.If you’re missing any items, please contact your dealer. LCD TV TV/SCART VOL. BACK SLEEP I-II CH. LIST COLOUR S.MODE P.MODE P.SIZE EXIT MENU INFO INPUT FAST TEXT Remote control/... -
Page 8: Lcd Tv
LCD TV Front View/Rear View The LED indicator shows amber colour when TV is in standby mode. VHF/UHF IN AC 230V~ AC POWER PC/VGA IN 50Hz SWITCH PC AUDIO IN Infrared VOLUME + / - Receiver Adjusts the volume up and down. Selects the main-menu item and change values for items when in the OSD mode. -
Page 9: Rear View
LCD TV Rear View VHF/UHF IN AC 230V~ AC POWER PC/VGA IN 50Hz SWITCH PC AUDIO IN VHF/UHF IN AC 230V~ AC POWER PC/VGA IN 50Hz SWITCH PC AUDIO IN ITEM DESCRIPTION Connects the AC power cord to this socket./ Make sure that this switch is 1 AC IN / Power Switch in the ON position. -
Page 10: Remote Control
Remote Control POWER Turns the LCD TV on and into standby mode . TV/SCART Mutes and restores your LCD TV sound. TV/SCART Pressing enter TV or SCART Mode. VOL. BACK SLEEP Select and switch to a channel by using 0-9 buttons. I-II CH. - Page 11 Remote Control Displays the OSD menu(on screen display). TV/SCART Allows you to move, select and set up the OSD VOL. options. BACK SLEEP INFO Pressing once displays a variety of information such I-II CH. LIST COLOUR as the current channel and the input source. S.MODE P.MODE INPUT...
- Page 12 Remote Control Installing the batteries in your remote control Pull the tab of the back cover and pull up on the cover to open the battery compartment of the remote control. Insert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and (-) ends indicated in the battery compartment.
-
Page 13: Setting Up Your Lcd Tv
Setting Up Your LCD TV How to install the TV Stand Follow the instructions below to install the TV stand: Open the box, and make sure all necessary parts are in the box. LCD TV Stand Cover an even stable surface with a soft cloth. Place the LCD TV unit face-down on the cloth. Fit the stand onto the bottom of the LCD TV unit as shown: Then push until stand clicks into the LCD TV’s stand socket. -
Page 14: Using Your Lcd Tv
Using your LCD TV The Power button on the side view and also on the remote control is only used for powering up and switching the TV to standby mode,it does not disconnect the device from the mains supply. To completely disconnect the main voltage, please switch off the power switch on the rear of the TV, or remove the power plug from the socket. -
Page 15: Installation
INSTALLATION Refer to the owner’s manual of the external equipment to be connected.When connecting external equipment, do not connect any AC power cords to wall outlets until you have completed all the connections. Connecting a TV aerial Basic Connection: Connecting cable or aerial . Make sure the power switch is switched off. -
Page 16: Connecting A Dvd Player
Connecting a DVD Player For best picture quality, if your DVD player has (Y Pb Pr) video output, Please use component cable instead of a standard video or S-video cable (cables not supplied). Otherwise connect using a standard Scart cable (not supplied). PC/VGA IN PC AUDIO IN Audio... -
Page 17: Connecting A Vcr & A Video Camera
Connecting a VCR & a Video Camera PC/VGA IN PC AUDIO IN Audio Audi ideo Video/Audio Cable METHOD A (AV3) Use an A/V cable to connect the VCR’s/ VIDEO CAMERA’ composite output sockets to your LCD TV. METHOD B (AV2) Use an Audio cable to connect the VCR’s/ the VIDEO CAMERA’s audio output sockets to your LCD TV. -
Page 18: Connecting A Tv Box And Satellite Receiver
Connecting a TV Box and Satellite Receiver Freeview / Sky boxes will usually have scart cables supplied with them. Connect the scart cable to the scart socket on the rear of the TV. PC/VGA IN PC AUDIO IN Audio Audi ideo HDMI CABLE Video/Audio Cable... -
Page 19: Hdmi
HDMI HDMI -This TV can accept High-Definition Multimedia Interface(HDMI). -This TV SET supports HDCP(High-bandwidth Digital Content Protection) Protocol for TV SET (480p, 720p, 1080i) modes. -When you connect to the output of an HD ready player (DVD Player, Set Top Box or PC) switch to the AV6(HDMI) function and the TV will automatically detect the resolution used by the HDMI source. -
Page 20: Using The Features
USING THE FEATURES Basic Operation Tuning in the TV channels After connecting an aerial to your LCD TV and connecting the mains cable to the TV and 230VAC mains socket, turn the POWER SWITCH of rear TV on, an amber light will show on the front centre panel of the TV. -
Page 21: Osd Menu Operation
OSD Menu Operation The main menu provides access to the following menus: Video Adjust picture setting such as picture mode, contrast, brightness,sharpness colour and advanced. Audio Adjust sound option and effects. Setup Adjust colour standard, sound standard, APS, Manual search, Channel setup. -
Page 22: Audio
Video OPTION DESCRIPTION Advanced Display Mode Cycles through wide mode settings: In TV/SCART/S-VIDEO/VIDEO mode: Wide, 4:3, Zoom, Original. In Y,Pb,Pr/VGA mode: Wide, 4:3. In HDMI mode, “P.SIZE” function is not available. Allows you to adjust the (Dynamic Contrast Enhancemen) to be off, low, mid, high. -
Page 23: Setup
Setup Use this Setup menu to select Colour Standard, Sound Standard, APS, Manual Search, Channel Setup. OPTION DESCRIPTION Colour Allows you to select the colour Standard standard : AUTO,PAL, SECAM. UK = PAL Setup Sound Allows you to select the sound standard : DK, BG, I, L/L’. -
Page 24: Preferences
Preferences Use this Preferences setting menu to set up some features: OSD, Blue Screen, Childlock, Sleep Timer, OSD Timer, OSD Reset. OPTION DESCRIPTION Language : Allows you to select the OSD to be English, German, French, Spanish, Italian, Dutch, Portugese, Polish Russian. -
Page 25: Troubleshooting
TROUBLESHOOTING Before contacting Goodmans Helpline, check the following chart for a possible cause of the trouble you are experiencing and for a solution. PROBLEM SOLUTION TV will not turn on Make sure the power cord is plugged in. The batteries in the remote control may be exhausted. Replace the batteries. -
Page 26: Specifications
SPECIFICATIONS Model GTVL19W17HD Panel System 19 inch LCD panel Display Resolution 1440 pixels (horizontal) x 900 pixels (vertical) Television System PAL- I Brightness 450 cd/m Contrast Ratio 800:1 Inputs/Output SCART HDMI PC Audio In Video In S-video In PHONES Y Pb Pr... -
Page 27: Display Modes
Display Modes The screen resolution has been optimized during production for the display modes listed below. If the signal from the system equals the standard signal mode, the screen adjusts automatically. If the signal from the system is not equal to the standard signal mode, adjust the screen resolution by referring to your video card user guide, otherwise there may be no video.
Need help?
Do you have a question about the GTVL19W17HD and is the answer not in the manual?
Questions and answers