Ricoh P C301W User Manual page 173

Problem
Images are cut off, or excess pages
are printed.
The color of the printout is different
from the color on the computer's
display.
Color changes extremely when
adjusted with the printer driver.
Color documents are printed in
black and white.
If you are using paper whose size is smaller than the paper
size selected in the application, use the same size paper
selected in the application. If you cannot load paper of the
correct size, use the reduction function to reduce the image,
and then print.
See the printer driver Help.
• The colors made using color toner may be different from
colors displayed on the display due to the difference of
methods to reproduce colors.
Only when using PCL 5c/6
Color gradation might appear differently if On is selected
for [Economy Color] on the [Print Quality] tab in the
printer driver's dialog box.
See the printer driver Help.
• Turn off the main power, and then turn it back on. If the
color still appears different on the printout, perform the
[Color Den/Reg] under [System Settings]. For details, see
page 77 "System Settings".
If this procedure fails to resolve the problem, contact your
sales or service representative.
Only when using PCL 5c/6
Do not make extreme settings for the color balance under
the [Print Quality] tab in the printer driver's dialog box.
See the printer driver Help.
• The printer driver is not set up for color printing.
See the printer driver Help.
• Some applications print color files in black and white.
Printer Problems
Solution
171