Table of Contents
Advertisement
DSL-2730E User Manual
The following table describes the parameters and buttons of this page:
Field
Protocol
ATM VCC
Login Name
Password
Authentication Method
Connection Type
Idle Time (s)
Bridge
Description
It displays the protocol type used for this WAN
connection.
The ATM virtual circuit connection assigned for
this PPP interface (VPI/VCI).
The user name provided by your ISP.
The password provided by your ISP.
You can choose AUTO, CHAP, or PAP.
You can choose Continuous, Connect on
Demand, or Manual.
If choose Connect on Demand, you need to
enter the idle timeout time. Within the preset
minutes, if the router does not detect the flow of
the user continuously, the router automatically
disconnects the PPPoE connection.
You can select Bridged Ethernet, Bridged
27
Advertisement
Table of Contents
