Displaying Your Phone Number - Sanyo SCP-85H Operating Manual

Table of Contents

Advertisement

Charging the Battery
Your PCS Phone comes with a rechargeable battery. You should charge the battery as soon as
possible so you can begin using your phone.
Keeping track of your battery's charge is important. If your battery level becomes too low, your
phone automatically turns off and you'll lose all the information you were just working on. For a
quick check of your phone's battery level, glance at the battery charge indicator located in the
upper-right corner of your phone's display screen. If the battery charge gets too low, the battery
icon
appears and the phone sounds a warning tone.
Always use a recommended Travel Charger or Vehicle Power Adapter to charge your battery.
Warning! Using the wrong battery charger could cause damage to your phone and void the
warranty.
Using the Travel Charger
To use the travel charger provided with your phone:
1. Plug the travel charger into a wall outlet.
2. Plug the other end into the travel charger into the charger jack on the side of your phone
(with the battery installed).
Charging when your phone is turned on:
The battery icon animates while charging.
The battery icon turns to
Charging when your phone is turned off:
The battery icon
Off--" is shown on the display while charging. When the battery is completely
discharged, you may wait for several minutes until the message is shown on the
display. The battery icon turns to
COMPLETE --Power Off--" when charging is complete.

Displaying Your Phone Number

To display your phone number:
Press MENU/OK > Contacts > My Name Card.
Note: To access the phone's main menu, press MENU/OK from standby mode. Menu items
may be selected by highlighting them with the navigation key and pressing MENU/OK, or you
can press the number corresponding to the menu item on your keypad.
when charging is complete.
appears, and the message "BATTERY CHARGING --Power
, and message changes to "CHARGING
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scp-8500

Table of Contents