Brightness Control; Language Selection - Sangean DPR-42BT User Manual

Brightness control

The brightness of the display can be adjusted for when the radio is in standby and for when it is in
use. If you use the unit in the bedroom, you may prefer a lower standby brightness level than a higher
brightness setting.
1.
With your radio switched on, press and hold Info / Menu button to access the menu for the current mode.
2.
Rotate the Tuning control knob to select "System Settings". Press the Select button to enter the
system settings menu.
3.
Rotate the Tuning control knob to select "Backlight". Press the Select button to enter the setting menu.
4.
In Backlight menu, there are 3 settings:
Timeout: to adjust the length of time before the backlight turns off.
On level: to adjust the brightness when the radio is in use.
Standby level: to adjust the brightness when the radio is in standby.
Rotate the Tuning control knob to select your option and press the Select button to confirm your setting.

Language selection

By default your radio will display all menus and messages in English. You can choose your preferred
language.
1.
With your radio switched on, press and hold Info / Menu button to access the menu for the current mode.
2.
Rotate the Tuning control knob to select "System Settings". Press the Select button to enter the
system settings menu.
3.
Rotate the Tuning control knob to select "Language". Press the Select button to enter the setting menu.
4.
Rotate the Tuning control knob to select your desired language. Press the Select button to confirm
the setting. The display will change to the chosen language.
032