Table of Contents
Advertisement
9-2. When "No response! Try calling again?" is displayed, do one of the
following:
Re-send call: Push the ENT key followed by the CALL key.
Cancel call: Press the CANCEL key to return to the standby display.
3.7.2
Receiving a polling call
Automatic reply
1. When a polling request is received and the equipment is set up for automatic
acknowledge POLLING on the AUTO ACK menu is ON and the ACK key is
set to show AUTO ACK on the display, t he display changes as shown in the
illustration below and the audio alarm sounds .
2. Press the CANCEL or ENT key to silence the alarm. The display changes as
below.
3. DSC OPERATION FOR NON-DISTRESS CASES
Polling auto ack
transmitted.
ROUTINE
TCmd1 : POLLING
TCmd2 : NO INFO
CANCEL ALARM
** Send Message **
POLLING ACK
TO : 123456789
ROUTINE
TCmd1 : POLLING
TCmd2 : NO INFO
PRESS ENT
3-27
Advertisement
Table of Contents
