Furuno 9ZWFM8800S Operator's Manual page 54

3. DSC OPERATION FOR NON-DISTRESS CASES
13. Choose SELECT CH or NO INFO as appropriate followed by pressing the
ENT key. If you chose SELECT CH, the following channel list appears. (The
example shown is the international, duplex channel list.) Rotate the CH knob
(or press up / down arrow key) to choose a channel you wish to communicate
and press the ENT key.
14. Press the CALL key more than three seconds. A message will be
transmitted.
3.2.2 Receiving a group call
Group ID must be registered in order to receive a group call. See paragraph 4.5.
1. When a group call is received, the alarm sounds and the ALARM LED blinks
two minutes.
2. Press the CANCEL or ENT key to silence the alarm. The following display
appears.
3. Press the ENT key. You can now communicate with the party, over the VHF
channel specified.
3-12
DUP CHANNEL
28
01 20
60
02 21
61
03 22
62
04 23
63
05 24
64
07 25
65
18 26
66
19 27
Group
call received.
FROM : 123456789
TO : 0234567
ROUTINE
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
CH : CH08
CANCEL ALARM
** Received Message **
APR01/ 04 12 : 34
GROUP CALL EOS
FROM : 123456789
TO : 023456789
ROUTINE
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
CH : CH08
PRESS ENT TO CHANGE CH
78 86
79
80
81
82
83
84
85
ECC : OK