Step 2: Install Memory Modules
Before in stalling the memo ry modules, adhere to the following warning:
1. When RAM LED is ON, do not install / remove DIMM from socket.
2. Please no te that the DIMM module can only f it in one direction due to
th e on e no tch . Wrong orientatio n will cause impro per installatio n.
Please change the insert orientation.
The motherboard has 2 dual inline memory module (DIMM) sockets. The BIO S will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM
socket. The DI MM module can only fit in one direction due to the notch. Memory size can vary
between sockets.
GA-8S661FXM Series Motherboard
8s661fxm_1001_q.p65
1. The DIMM s ocket has a notch, so the DIMM memory
module can only fit in one direc tion.
2. Insert the DIM M memory module v ertically into the DIMM
socket. Then push it dow n.
3. Close the plas tic clip at both edges of the DIMM sockets
to lock the DIMM module.
Rev erse the installation steps w hen y ou w ish to remov e
the DIMM module.
- 14 -
14
Notch
DDR
? 2 003/9/24, 上午 09:33