Onboard Serial Port 1; Onboard Serial Port 2; Onboard Parallel Port; Parallel Port Mode - Gigabyte GA-8S661FXM User Manual

Onboard Serial Port 1

Disabled
3F8/ IRQ4
2F8/ IRQ3
3E8/ IRQ4
2E8/ IRQ3
Auto

Onboard Serial Port 2

Disabled
3F8/ IRQ4
2F8/ IRQ3
3E8/ IRQ4
2E8/ IRQ3
Auto

Onboard Parallel port

This feature allows you to select from a given set of parameters if the parallel port uses the onboard
I/O controller.
Disabled
378/ IRQ7
278/ IRQ5
3BC/ IRQ7

Parallel Port Mode

This feature allows you to connect with an advanced printer via the port mode it supports.
SPP
EPP
ECP
ECP+EPP
ECP Mode Use DMA
This feature allows you to select Direct Memory Access(DMA) channel if the ECP mode selected.
1
3
8s661fxm_1001_b.p65
Disable onboard Serial port 1.
Enable onboard Serial port 1 and address is 3F8, using IRQ4. (Default v alue)
Enable onboard Serial port 1 and address is 2F8, using IRQ3.
Enable onboard Serial port 1 and address is 3E8, using IRQ4.
Enable onboard Serial port 1 and address is 2E8, using IRQ3.
BIOS w ill autom atically s etup the port 1 address.
Disable onboard Serial port 2.
Enable onboard Serial port 2 and address is 3F8, using IRQ4.
Enable onboard Serial port 2 and address is 2F8, using IRQ3. (Default v alue)
Enable onboard Serial port 2 and address is 3E8, using IRQ4.
Enable onboard Serial port 2 and address is 2E8, using IRQ3.
BIOS w ill autom atically s etup the port 2 address.
Disable onboard LPT port.
Enable onboard LPT port and address is 378, using IRQ7. (Default Value)
Enable onboard LPT port and address is 278, using IRQ5.
Enable onboard LPT port and address is 3BC, using IRQ7.
Using Parallel port as Standard Parallel Port.
Using Parallel port as Enhanced Parallel Port.
Using Parallel port as Ex tended C apabilities Port. (Default Value)
Using Parallel port as ECP & EPP mode.
Set ECP Mode Use DMA to 1.
Set ECP Mode Use DMA to 3. (Default Value)
- 41 -
41
BIOS Setup
? 2 003/9/24, 上午 09:49