Step 2: Install Memory Modules - Gigabyte GA-8ID2003 User Manual

P4 titan sdram motherboard

Hide thumbs Also See for GA-8ID2003:

Table of Contents

Step 2: Install memory modules

The motherboard has 3 dual in-line memory module (DIMM) sockets. The BIOS will automatically

detects memory type and size. To install the memory module, just push it vertically into the DIMM Socket

.The DIMM module can only fit in one direction due to the two notch. Memory size can vary between

sockets.

1. The DIMM slot has two notch, so the

DIMM memory module can only fit in

one direction.

3. Close the plastic clip at both edges of the DIMM sockets to lock the DIMM module.

Reverse the installation steps when you wish to remove the DIMM module.

Please note that the DIMM module can only fit in one direction due to the one

notch. Wrong orientation will cause improper installation. Please change the

insert orientation.

SDRAM

2. Insert the DIMM memory module

vertically into the DIMM socket. Then

push it down.

- 11 -

Hardware Installation Process

Table of Contents