Flexrio Documentation And Resources; Verifying The System Requirements - National Instruments PCIe-5775 Getting Started Manual

FlexRIO Documentation and Resources

Document/Resource
PCIe-5775 Getting
Started Guide (this
document)
PCIe-5775
Specifications
PCIe-5775 Safety,
Environmental, and
Regulatory Information
LabVIEW FPGA Module
Help
FlexRIO Help
LabVIEW Examples
IPNet
FlexRIO product page

Verifying the System Requirements

To use the PCIe-5775, your system must meet certain requirements. For more information
about minimum system requirements, recommended system, and supported application
development environments (ADEs), refer to the readme, which is available on the software
media or online at ni.com/updates.
2 | ni.com | PCIe-5775 Getting Started Guide
Table 1. FlexRIO Documentation and Resources
Location
Available at ni.com/
manuals.
Available at ni.com/
manuals.
Available at ni.com/
manuals.
Embedded in LabVIEW
Help and at ni.com/
manuals.
Available at ni.com/
manuals.
Available in NI Example
Finder. In LabVIEW,
click Help»Find
Examples»Hardware
Input and Output»
FlexRIO.
Located at ni.com/ipnet.
Located at ni.com/flexrio. Contains product information and
Description
Contains installation instructions and
basic programming instructions for
your PCIe-5775.
Contains specifications for your
PCIe-5775.
Contains important safety,
environmental, and regulatory
information for your PCIe-5775.
Contains information about the basic
functionality of the LabVIEW FPGA
Module.
Contains information about the FPGA
module front panel connectors and
I/O, programming instructions, and
I/O component-level IP (CLIP).
Contains examples of how to run
FPGA VIs and Host VIs on your
device.
Contains LabVIEW FPGA functions
and intellectual property to share.
data sheets for FlexRIO devices.