Table of Contents
Advertisement
Accessing FlexRIO Examples
FlexRIO examples are available in LabVIEW's NI Example Finder. Complete the following
steps to access the examples by task.
1.
In LabVIEW, click Help»Find Examples.
2.
In the NI Example Finder window that appears, click Hardware Input and Output»
FlexRIO.
The examples are sorted by task. Click on an example and refer to the Information
window for a description of the example. Refer the Requirements window for a list of
hardware devices that can run the example.
You can also click the Search tab to search all installed examples by keyword. For
example, search for
Examples also are available online that demonstrate FlexRIO basics, such as using DRAM,
acquiring data from adapter modules, and performing high throughput streaming. Refer to
ni.com/examples
for these examples and for more information.
Block Diagram
The following figure shows a block diagram of the carrier portion of the PCIe-5775 (KU035
FPGA version).
+5 V
+1.8 V
+12 V
to locate all FlexRIO examples.
FlexRIO
Figure 4. Carrier Block Diagram (KU035)
Flash
GPIO
Configuration, GPIO
MGTs
Module Clocking
Synchronization
DRAM Bank 0
(2 GB)
Reference Clock
Power Supplies
+12 V
Gen3 x8 PCIe
FPGA
Clk 100
Clk 10
DRAM Bank 1
(2 GB)
PCIe-5775 Getting Started Guide | © National Instruments | 9
+12 V, +3.3 V
Triggers
Advertisement
Table of Contents
