User Setting; Access List - Belkin F1DC108V User Manual

USING YOUR R
SECTIONS
Table of Contents

User Setting

This option allows you to specify an administrator/user name and passwords
to prevent unauthorized users from accessing the OSD and KVM Switch.
One administrator and eight users can be stored. To add the name and
password, use the arrow keys to navigate to the desired field, and then
press "Enter" to select and edit. Press "Enter" again to save the entry. The
maximum characters for the name and password fields are eight characters.
The default administrator name and password are:
Username: admin
Password: belkin
18.5" Widescreen Rack-Mount Console with Built-In PRO3 KVM Switch
UNT CONSOLE
1 2 3 4 4 5

Access List

This feature allows you to discretely specify the user access at a port level.
Only the administrator can set up the access list. The column on the left lists
the port names. The users are listed by their number (1 to 8). Navigate to the
user and port, and press the "Enter" key to enable/deny the access right for
each user and port combination. "X" represents access is denied and "O"
represents access is enabled.
Note: User name and password fields cannot be left blank. If two
identical user names are entered, the first user-name password will apply.
25
6 6 7 8