Powering Up The Systems - Belkin F1DC108V User Manual

INSTALLATION
SECTIONS
1 2 3 4 5 6 7 8
Table of Contents

Powering Up the Systems

Verify that all servers connected to the PRO3 KVM Switch are powered
on. If any connected servers have not been powered on, it is okay to do so
at this time (servers can be powered on simultaneously). The PRO3 KVM
Switch emulates both a mouse and keyboard on each port and allows
your server to boot normally.
The server connected to Port "1" will be displayed on the monitor. Check
that the keyboard, monitor, and mouse are working normally. Check all
occupied ports to verify that all servers are connected and responding
correctly. If you encounter an error, check your cable connections
for that server and reboot. If the problem persists, please refer to the
"Troubleshooting" section in this User Manual.
17
18.5" Widescreen Rack-Mount Console with Built-In PRO3 KVM Switch