Using The Automatic Adjustment Feature; Adjusting The Position; Correcting The Keystone Distortions - 3M S15 Operator's Manual

Operating

Using the automatic adjustment feature

1.
Press the AUTO button on the remote control.
 At a RGB signal
The vertical position, the horizontal position, the clock phase,
the aspect and horizontal size will be automatically adjusted.
Make sure that the application window is set to its maximum size prior to
attempting to use this feature. A dark picture may still be incorrectly adjusted.
Use a bright picture when adjusting.
 At a video signal
S-VIDEO · VIDEO:
The video format best suited for the respective input signal, the vertical position,
the horizontal position phase and the aspect will be automatically adjusted.
COMPONENT:
The vertical position, the horizontal position, the clock phase and the aspect
will be automatically adjusted.
This function is available only when the AUTO mode is selected at the
VIDEO FORMAT MENU. Refer to Page
For a component video signal, the signal type is automatically identified,
regardless of this function.
● The automatic adjustment operation requires approximately 10 seconds. Also
please note that it may not function correctly with some input.

Adjusting the position

1.
Press the POSITION button on the remote control.
The "POSITION" indication will appear on the screen.
2.
Use the cursor buttons ▲/▼/◄/► to adjust the picture
position.
When you want to reset the operation, press the RESET button on the remote
control during the operation.
To complete this operation, press the POSITION button again. Even if you don't
do anything, the dialog will automatically disappear after a few seconds.
● When this function is performed at a video signal, a certain extra such as a line
may appear outside a picture.

Correcting the keystone distortions

1.
Press the KEYSTONE button on the remote control.
A dialog will appear on the screen to aid you in correcting
the distortion.
2.
Use the cursor buttons ▲/▼ to correct the distortion.
To close the dialog and complete this operation, press
the KEYSTONE button again. Even if you don't do anything, the dialog will
automatically disappear after a few seconds.
● This function may not be work well with some input.
● The adjustable range for correcting will vary among inputs.
20
of this manual.
(32)
© 3M 2005. 3M™ Digital Projector S15/X15
STANDBY/ON
VIDEO RGB SEARCH
STANDBY/ON
ASPECT AUTO BLANK
SEARCH
VIDEO RGB
MAGNIFY VOLUME
ON
MUTE
ASPECT AUTO BLANK
OFF
FREEZE KEYSTONE
ZOOM
-
+
VOLUME
MAGNIFY
POSITION MENU
ON
ENTER
MUTE
RESET
ESC
OFF
FREEZE KEYSTONE
ZOOM
-
+
POSITION MENU
ENTER
ESC RESET
STANDBY/ON
SEARCH
VIDEO RGB
BLANK
ASPECT AUTO
MAGNIFY VOLUME
ON
MUTE
OFF
FREEZE KEYSTONE
STANDBY/ON
VIDEO SEARCH
RGB
BLANK
ASPECT AUTO
ZOOM
-
MAGNIFY VOLUME
+
ON
MUTE
MENU
OFF POSITION
FREEZE KEYSTONE
ZOOM
-
+
POSITION MENU
ENTER
ENTER
ESC RESET
ESC RESET