Turning The Power Off - Hitachi PJ-TX200W User Manual

Table of Contents

Advertisement

Turning the power off

1.
Press the STANDBY/ON button on the projector or
the POWER button on the remote control.
The message "Power off?" will appear on the screen
for approximately 5 seconds.
2.
Press the STANDBY/ON button on the projector
or the POWER button on the remote control again
when the "Power off?" message appears.
The projector lamp will go off, and the POWER
indicator will begin blinking in orange.
Then the POWER indicator will stop blinking and
light steady orange when the lamp is finished
cooling down.
3.
Make sure that the power indicator is lit a steady orange, and set the power
switch to the OFF position.
The POWER indicator will go off.
Do not set the power switch to the OFF position while the POWER indicator
is green or blinking.
4.
Close the lens cover. For safety purposes, disconnect the power cord if the
projector is not to be used for prolonged periods of time.
NOTE
• Turn the power off in right order. Turn off the connected devices first
and the projector last.
• Except for emergencies, whenever you turn the projector off be sure to follow
the procedure explained in "Turning off the power", and do not disconnect the
power cord until the procedure is complete. Neglect can cause damage to the
electrode and/or prevent the lamp from lighting.
• This projector is controlled by an internal microprocessor. Under certain
exceptional circumstances, the projector may not operate correctly even when
turning off the power. If this occurs, please push the restart switch (7, 64)
using a pin or similar object. Make sure that the power indicator is lit a steady
orange, and set the power switch to the OFF position. Only use the restart
switch in exceptional circumstances.
• If there is a power failure, or the restart switch is used, allow the projector to
cool down for at least 10 minutes before turning on again.
STANDBY/ON
STANDBY/ON button
TEMP
POWER
LAMP
POWER button
MENU
ENTER
POWER indicator
INPUT
RESET
Projection
POWER
LIGHT
BLACK
MODE
MEMORY
ASPECT
IRIS
ENTER
MENU
RESET
BRIGHT CONTRAST COLOR
HDMI
PC
AUTO
COMPO
S-VIDEO
VIDEO
 
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pj-tx200

Table of Contents