Warranty And After-Service; Specifications - Hitachi PJ-TX200W User Manual

Warranty and after-service

When a problem occurs with the equipment, first refer to "Troubleshooting"
(62-66) and run through the suggested checks. If this does not resolve the
problem, please contact your dealer or service company. They will tell you what
warranty condition is applied.
Specifications
Item
Product name
Panel size
Liquid
crystal Drive system
panel
Pixels
Lens
Lamp
Power Supply
Power Consumption
Temperature range
Size
Weight (mass)
Ports
Lamp
Optional
Air filter
parts
Others
NOTE
• These specifications are subject to change without notice.
Warranty and after-service / Specifications
Liquid crystal projector
1.8 cm (0.7 Type)
TFT active matrix
921,600 pixels (1280 horizontal x 720 vertical)
Zoom lens F=1.7 ~ 2.4 f = 20.0 ~ 31.9 mm
150W UHB
AC100-120V/2.4A, AC220-240V/1.3A
220W
5 ~ 35°C (Operating)
340 (W) x 113 (H) x 299 (D) mm
(Not including protruding parts)
4.7 kg
RGB input port:
COMPUTER ...................... D-sub 15pin mini shrink jack x 1
Digital input port:
HDMI .................................................... HDMI connector x 1
Communication port:
CONTROL ..............................................D-sub 9pin plug x 1
Video input port:
VIDEO ............................................................. RCA jack x 1
S-VIDEO ........................................... Mini DIN 4pin jack x 1
COMPONENT VIDEO ..................................... RCA jack x 3
Other port:
TRIGGER (12V/25mA) ..................................................... x 1
DT00665
NJ22632
• Please consult your dealer.
Specification
67