Basic Operation; Aspect - Hitachi PJ-TX200W User Manual

Basic operation

Basic operation
The following functions are basic and useful. They can also be easily accessed
using the remote control.
Some functions display dialogs to aid you. Although the dialogs automatically
close after several seconds, the dialogs can be deactivated using the MESSAGE
function in the SCREEN menu (49).

ASPECT

ASPECT refers to the aspect ratio modes. The
following aspect ratio modes are available. Select a
mode corresponding to the input signal to be used.
1.
Press the ASPECT button.
Each time the button is pressed the mode will
change and a dialog indicating the selected mode
will be displayed.
 For a computer (RGB) signal
NORMAL  4:3  16:9
 For an HDMI signal
NORMAL  4:3  16:9  WIDE  MOVIE1  MOVIE2  14:9
 For a video, s-video or component video signal
4:3  16:9  WIDE  MOVIE1  MOVIE2  14:9
 For no signal or an unrecognized signal
16:9 (fixed)
Example for
a 16:9 signal
Example for
a 4:3 signal
NOTE
• The NORMAL mode uses the signal's original aspect ratio.
• Performing an automatic adjustment initializes the aspect ratio setting.
• The ASPECT function can also be accessed via the EASY MENU (31) or
the IMAGE menu in the Advanced Menu (43).
24
4:3 16:9
16:9
NORMAL
4:3
NORMAL
WIDE MOVIE1
POWER
POWER LIGHT
BLACK MODE
BLACK MODE MEMORY
ASPECT IRIS
ASPECT
ENTER
MENU RESET
BRIGHT CONTRAST COLOR
ENTER
HDMI PC AUTO
COMPO S-VIDEO VIDEO
MENU
BRIGHT CONTRAST COLOR
HDMI PC
COMPO S-VIDEO
MOVIE2 14:9
LIGHT
MEMORY
IRIS
RESET
AUTO
VIDEO