Jp2: Front Audio; Jp8 / Led1: Str Led Connector & Dimm Led - Gigabyte GA-7ZMMH User Manual

7ZMMH Motherboard
JP8 / LED1: STR LED Connector & DIMM LED
Please note:
Do not remove memory modules while DIMM LED is on. It might cause short or
other unexpected damages due to the 3.3V stand by voltage. Remove memory
modules only when STR function is disabled by jumper and AC Power cord is
disconnected.

JP2: Front Audio

`
Please note:
If you want to use "Front Audio" connector, you must move 11-12,13-14
Jumper.
In order to utilize the front audio header, your chassis must have front audio
connector. Also please make sure the pin assigment on the cable is the same as
the pin assigment on the MB header. To find out if the chassis you are buying
support front audio connector, please contact your dealer.
STR LED Connector External.
1
+
Pin No.
1
1
2
2
3,
4,5,6,10,15
7
8,16
15
16
9
11
13
12
14
21
DIMM LED
Definition
Incase speaker (R)
Incase speaker (L)
GND
+12V
NC
MIC
Front Audio (R)
Front Audio (L)
Rear Audio (R)
Rear Audio (L)