Gigabyte GA-7ZMMH User Manual page 39

7ZMMH Motherboard
Step 2:
(If you want to use STR Function, please set jumper JP7 Pin1-2 (Closed.)
Step 3:
Power on the computer and as soon as memory counting starts, press <Del>. You will enter
BIOS Setup. Select the item "POWER MANAGEMENT SETUP", then select "ACPI Standby
State: S3 /STR". Remember to save the settings by pressing "ESC" and choose the "SAVE &
EXIT SETUP" option.
Congratulation! You have completed the installation and now can use the STR function.
Enable
Pin No. Definition
1-2 close STR Enable
2-3 close Normal (Default)
31
1