Gigabyte 7ZXR Series User Manual
Gigabyte 7ZXR Series User Manual

Gigabyte 7ZXR Series User Manual

7zxr series amd athlon/duron socket a motherboard
Hide thumbs Also See for 7ZXR Series:
Table of Contents

Advertisement

Quick Links

DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Mother Board
Model Number:
GA-7ZXR
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)
This device may not cause harmful
and
(2)
this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name:
ERIC LU
Eric Lu
Signature:
Date:
Feb. 09, 2001
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection
against
residential
installations.
generates,
uses,
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
harmful
interference
This
equipment
and
can
radiate
in
radio

Advertisement

Table of Contents
loading

Summary of Contents for Gigabyte 7ZXR Series

  • Page 1 FCC Compliance Statement: This equipment has been tested and found to DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These Responsible Party Name: G.B.T. INC. limits are designed to provide reasonable Address: 18305 Valley Blvd., Suite#A LA Puent, CA 91744...
  • Page 2: Declaration Of Conformity

    Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-7ZXR is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive EN 55011...
  • Page 3 7ZXR Series AMD Athlon /Duron Socket A Motherboard USER'S MANUAL AMD Athlon /Duron Socket A Processor Motherboard REV. 3.0 Frist Edition R-3.0-01-010510...
  • Page 5 How This Manual Is Organized This manual is divided into the following sections: 1) Revision History Manual revision information 2) Item Checklist Product item list 3) Features Product information & specification 4) Hardware Setup Instructions on setting up the motherboard 5) Performance &...
  • Page 7: Table Of Contents

    Table Of Content Revision History Item Checklist Summary of Features 7ZXR Series Motherboard Layout Page Index for CPU Speed Setup / Connectors / Panel and Jumper Definition Performance List P.26 Block Diagram P.27 Suspend to RAM Installation P.28 Dual BIOS Introduction P.34...
  • Page 8: Revision History

    7ZXR Series Motherboard Revision History Revision Revision Note Date Initial release of the 7ZXR Series motherboard user’s Dec. 2000 manual. Initial release of the 7ZXR Series motherboard user’s Jan. 2001 manual. Second release of the 7ZXR Series motherboard user’s Feb. 2001 manual.
  • Page 9: Item Checklist

    Item Checklist Item Checklist The 7ZXR Series motherboard Cable for IDE / floppy device Diskettes or CD (TUCD) for motherboard driver & utility 7ZXR Series user’s manual...
  • Page 10: Summary Of Features

    Summary Of Features Form Factor 30.5 cm x 24.4 cm ATX size form factor, 4 layers PCB. Motherboard 7ZXR Series includes 7ZXR , 7ZXR-C AMD Athlon (K7) Socket A Processor 256K/64K L2 cache on die Supports 500MHz ~ 1GHz Chipset...
  • Page 11 Summary of Features PS/2 Connector PS/2 Keyboard interface and PS/2 Mouse interface On-Board Sound Creative CT5880 sound AC’97 CODEC Line In/Line Out/Mic In/AUX In/CD In/TEL/Game Port /Four Speaker & SPDIF On-Board RAID Support data striping (RAID 0) or mirroring (RAID 1) . (Optional) Supports concurrent dual IDE controller operation.
  • Page 12: 7Zxr Series Motherboard Layout

    7ZXR Series Motherboard 7ZXR Series Motherboard Layout PS/2 Socket A CPU LED1 JP21 VT8363A 7ZXR AGP 1 Clock PCI1 JP19 Generator PCI2 VT82C JP20 686B BAT1 PCI3 PCI4 PCI5 Creative MAIN BACK Up USB2 CT5880 BIOS BIOS JP17 JP16 PCI6...
  • Page 13: Page Index For Cpu Speed Setup / Connectors / Panel And Jumper

    7ZXR Series Motherboard Layout Page Page Index for CPU Speed Setup/Connectors/Panel and Jumper Definition CPU Speed Setup Connectors P.10 ATX Power P.10 COM A / COM B / LPT Port P.10 Floppy Port P.11 Game & Audio Port P.11 IDE 1/IDE2 (Primary/Secondary), IDE3/IDE4(Promise RAID/ATA100) Port P.12...
  • Page 14: Cpu Speed Setup

    7ZXR Series Motherboard CPU Speed Setup There are 2 ways to set system bus speed. To set system bus speed by BIOS, please refer to P. 95. To set system bus speed by DIP switch ( SW1 and JP21) . Please refer to table below.
  • Page 15 CPU Speed setup The FSB Speed of the VIA KT133A is 100MHz/133MHz. JP21 Pin No. Definition 1-2 close CPU Clock Frequency 133MHz 2-3 close CPU Clock Frequency 100MHz (Default) The CPU speed must match with the frequency ratio. It will cause system hanging up if the frequency ratio is higher than that of CPU.
  • Page 16 7ZXR Series Motherboard SW4: (Memory Over Voltage ) SW3 & SW5 3.3V 3.4V 3.5V SW4 & SW6 SW5: (AGP Over Voltage ) 1.5V 1.6V 1.7V SW6: (CPU Ratio ) O : ON, X : OFF Auto 5.5X 6.5X 7.5X 8.5X 9.5X...
  • Page 17: Connectors

    Connectors Connectors ATX Power Pin No. Definition 3,5,7,13, 15-17 1,2,11 3.3V 4,6,19,20 +12V -12V Power Good 5V SB(stand by+5V) PS-ON(Soft On/Off) COM A / COM B / LPT Port LPT Port COM A COM B...
  • Page 18: Floppy Port

    7ZXR Series Motherboard Floppy Port Red Line FDD1 Game & Audio Port Game Port MIC In Line Out 1 Line In/Line Out Line Out 1: Line Out or SPDIF (The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby digital decoder).
  • Page 19: J2 (System Fan)

    Connectors IDE1,IDE2 (Primary/Secondary), IDE3/IDE4(RAID/ATA100) Port(Optional) Red Line IDE 1 IDE 2 IDE 3 IDE 4 J2 : System Fan Pin No. Definition Control +12V...
  • Page 20: Definition

    7ZXR Series Motherboard J3 : CPU Fan Pin No. Definition Control +12V SENSE J4 : IR Pin No. Definition VCC (+5V) IR Data Input IR Data Output...
  • Page 21: J12 (Wake On Lan)

    Connectors J12 : Wake On LAN Pin No. Definition +5V SB Signal J13 : Ring Power On (Internal Modem Card Wake Up) Pin No. Definition Signal...
  • Page 22: J15 (Aux_In)

    7ZXR Series Motherboard J15 : AUX_IN Pin No. Definition AUX-L AUX-R J16 TEL : The connector is for Modem with internal voice connector Pin No. Definition Signal-In Signal-Out...
  • Page 23: J18 (Cd Audio Line In)

    Connectors J18 : CD Audio Line In Pin No. Definition CD-L CD-R JP6 : Power Fan Pin No. Definition Control +12V...
  • Page 24: Jp8 / Led1 (Str Led Connector & Dimm Led)

    7ZXR Series Motherboard JP8 / LED1: STR LED Connector & DIMM LED STR LED Connector External. DIMM LED PS/2 Keyboard & PS/2 Mouse Connector PS/2 PS/2 Mouse Mouse/Keyboard Pin No. Definition Data VCC(+5V) Clock PS/2 Keyboard...
  • Page 25: Usb 1 Connector

    Connectors USB 1 Connector Pin No. Definition USB V0 USB D0- USB D0+ USB V1 5 6 7 8 USB D1- USB D1+ USB 2 Connector Pin No. Definition USB D2- USB D2+ USB D3+ USB D3-...
  • Page 26: Panel And Jumper Definition

    7ZXR Series Motherboard Panel And Jumper Definition J11: 2x11 Pins Jumper S P K P P P+ GN (Green Switch) Open: Normal Operation Close: Entering Green Mode GD (Green LED) Pin 1: LED anode(+) Pin 2: LED cathode( ) HD (IDE Hard Disk Active LED)
  • Page 27: Jp3 (Clear Cmos Function)[Optional]

    Panel and Jumper Definition JP3 : Clear CMOS Function (Optional) Pin No. Definition 1-2 close Normal (Default) 2-3 close Clear CMOS JP4: Rear USB Device Wake up Selection (USB Connector USB1) Pin No. Definition 1-2 Close Normal (Default) 2-3 Close USB Device Wake up (If you want to use "USB Dev Wakeup From S3-S5"...
  • Page 28: Jp7 (Str Function Enabled)

    7ZXR Series Motherboard JP7 : STR Function Enabled Pin No. Definition Open Normal (Default) Close STR Enabled JP9 : Onboard Sound Function Selection Pin No. Definition 1-2 close Onboard Sound Enable (Default) 2-3 close Onboard Sound Disable...
  • Page 29: Jp10 (Bios Write Protection)[Optional]

    Panel and Jumper Definition JP10 : BIOS Write Protection (Optional) Pin No. Definition Write Protect Enable Write Protect Disable (Default) Please Set Jumper JP10 to ”Open” to enabled BIOS Write Function when you update new BIOS or new device JP11 : Front USB Device Wake up Selection (USB Port USB2) USB2 Pin No.
  • Page 30 7ZXR Series Motherboard JP16 /JP17/JP18: AMR (Primary or Secondary) Select (AMR Audio Modem Riser) JP17 JP16 JP18 JP16 JP17 JP18 Onboard AC97 AMR (Primary) (Default) Onboard AC97+MR (Secondary) JP19 : Onboard Promise Selection (Optional) Pin No. Definition 1-2 close IDE Raid disabled...
  • Page 31: J50 (Nb Heat Sink Fan)

    Panel and Jumper Definition JP20 : RAID/ATA100 Selection (Optional) Pin No. Definition 1-2 close Raid Function 2-3 close ATA 100 Function (Default) (If you want to use "Raid Function”, your IDE3 and IDE4 must be connected with Hard Driver. J50 : NB Heat Sink FAN Pin No.
  • Page 32: Bat1 (Battery)

    7ZXR Series Motherboard BAT1: Battery CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
  • Page 33: Performance List

    AMD Althon 1200MHz DRAM (128x2) MB SDRAM (MICRON MT48LC8M8A2-8E B) CACHE SIZE 384 KB included in CPU DISPLAY Gigabyte GF2000 O.S. Windows NT 4.0 SPK6 Display Driver at 1024 x 768 x 16 bit colors 75Hz. DRIVER AMD Althon AMD Althon...
  • Page 34: Block Diagram

    7ZXR Series Motherboard Block Diagram CPUCLK (100/133MHz) AMD-K7 2X/4X System Bus 100/133MHz AGPCLK (66MHz) 3.3V SDRAM VT8363A 100/133MHz HCLK (100/133MHz) AGPCLK (66MHz) 33MHz PCI Bus 33MHz 66MHz 14.318MHz 48MHz CT5880 VT82C Promise 686B PDC20265R Option 4 USB Ports AC97 Game...
  • Page 35: Suspend To Ram Installation

    Suspend to RAM Installation Suspend To RAM Installation (Optional) A.1 Introduce STR function: Suspend-to-RAM (STR) is a Windows 98/ME/2000 ACPI sleep mode function. When recovering from STR (S3) sleep mode, the system is able, in just a few seconds, to retrieve the last “state”...
  • Page 36 7ZXR Series Motherboard Step 2: (If you want to use STR Function, please set jumper JP7 Closed.) Pin No. Definition Open Normal (Default) Close STR Enabled Step 3: Power on the computer and as soon as memory counting starts, press <Del>. You will enter BIOS Setup.
  • Page 37 Suspend to RAM Installation A.3 How to put your system into STR mode? (For example : Windows ME) There are two ways to accomplish this: Choose the “Stand by” item in the “Shut Down Windows” area. Press the “Start” button and then select “Shut Down” B.
  • Page 38 7ZXR Series Motherboard Define the system ”power on” button to initiate STR sleep mode: A. Double click “My Computer” and then “Control Panel” B. Double click the “ Power Management” item.
  • Page 39 Suspend to RAM Installation C. Select the “Advanced” tab and “Standby” mode in Power Buttons. D. Restart your computer to complete setup. Now when you want to enter STR sleep mode, just momentarily press the “Power on” button.. A.4 How to recover from the STR sleep mode? There are five ways to “wake up”...
  • Page 40 7ZXR Series Motherboard A.5 Notices : In order for STR to function properly, several hardware and software requirements must be satisfied: Your ATX power supply must comply with the ATX 2.01 specification (provide more than 720 mA 5V Stand-By current).
  • Page 41: Dual Bios Introduction

    Dual BIOS Introduction Dual BIOS Introduction What is Dual BIOS Technology? Dual BIOS means that there are two system BIOS (ROM) on the motherboard, one is the Main BIOS and the other is Backup BIOS. Under the normal circumstances, the system works on the Main BIOS.
  • Page 42 7ZXR Series Motherboard b. AMI Dual BIOS Flash ROM Programming Utility AMI Dual BIOS Flash ROM Programming Utility V1.02 Boot From……………………….. Main BIOS Main ROM Type………………… HYUNDAI HY29F002T Backup ROM Type……………… HYUNDAI HY29F002T Wide Range Protection Disable Boot From Main BIOS...
  • Page 43 Dual BIOS Introduction Boot From : Main BIOS (Default), Backup BIOS Status 1: The user can set to boot from main BIOS or Backup BIOS. Auto Recovery : Enabled(Default), Disabled When one of the Main BIOS or Backup BIOS occurs checksum failure, the working BIOS will automatically recover the BIOS of checksum failure.
  • Page 44 7ZXR Series Motherboard Load XXX.XX Are you sure to COPY BIOS? [Enter] to Continue Or [Esc] to abort.. Load XXX.XX !! COPY BIOS Completed –Pass !! Please press any key to continue Congratulation! You have completed the flashed and now can restart system.
  • Page 45 Technology FAQ GIGABYTE Technology is pleased to introduce DualBIOS technology, a hot spare for your system BIOS. This newness “Value-added” feature, in a long of innovations from GIGABYTE, is available on GA-7ZXR motherboard. Future GIGABYTE motherboards will also incorporate this innovation.
  • Page 46 7ZXR Series Motherboard I. Q: What is DualBIOS technology? Answer: DualBIOS technology is a patented technology from Giga-Byte Technology. The concept of this technology is based on the redundancy and fault tolerance theory. DualBIOS technology simply means there are two system BIOSes (ROM) integrated onto the motherboard. One is a main BIOS, and the other is a backup BIOS.
  • Page 47 Dual BIOS Introduction III. Q: How does DualBIOS technology work? Answer: 1. DualBIOS technology provides a wide range of protection during the boot up procedure. It protects your BIOS during system POST, ESCD update, and even all the way to PNP detection/assignment.
  • Page 48 7ZXR Series Motherboard 2. During or after a BIOS upgrade, if DualBIOS detects that the main BIOS is corrupt, the backup BIOS will take over the boot-up process automatically. Moreover, it will verify the main and backup BIOS checksums when booting-up. DualBIOS...
  • Page 49: Four Speaker & Spdif Introduction

    Four Speaker & SPDIF Introduction Four Speaker & SPDIF Introduction Four Speaker Introduction What is Four Speaker? The Creative CT5880 audio chip can support up to 4 speaker output. If you select “Four speaker out”, Line In will be reconfigured as another line out to support a second pair of speakers.
  • Page 50 7ZXR Series Motherboard c. Select “Four speaker” item. Microsoft Windows Me setup procedure: a. Go to “Control Panel” Double click “Sounds and Multimedia”.
  • Page 51 Easy TuneIII Introduction b. Select “Audio” Page, and click “Advanced” button. Click ”Advanced”. c. Select “Quadraphonic Speakers” and click ok. Click “Quadraphonic Speakers”. Four Speaker Application The four speaker function will only be supported in application softwares that use Microsoft DirectX and Creative EAX, for example, the game titles, software DVD player and MP3 player.
  • Page 52: Spdif Introduction

    7ZXR Series Motherboard SPDIF Introduction What is SPDIF? The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby digital decoder. How to use SPDIF? a. Click your mouse right button in “My Computer” and select the “Properties” item.
  • Page 53 Easy TuneIII Introduction c. Click “Sound, video and game controllers” item and select the “Creative Sound Blaster PCI128” item. d. Click “Settings” item and select the “Output Mode” item.
  • Page 54 7ZXR Series Motherboard e. Click “Digital” item, Line Out will be reconfigure to SPDIF Out. ※Note, The motherboard doesn’t support “Autosense”.
  • Page 55: Bios Introduction

    BIOS, just choose “Save Current BIOS” to save it first. You make a wise choice to use Gigabyte, and @BIOS update your BIOS smartly. You are now worry free from updating wrong BIOS, and capable to maintain and manage your BIOS easily.
  • Page 56: Easy Tune/// Tm Introduction

    “Advanced Mode” to enjoy “sport drive” class overclocking. In “Advanced Mode”, one can change the system bus speed in small increments to get ultimate system performance. And no matter which mainboard is used, if it’s a Gigabyte’s product*, EasyTuneIII helps to perform the best of system.
  • Page 57 Easy TuneIII Introduction This wonderful software is now free bundled in Gigabyte motherboard attached driver CD. Users may make a test drive of “EasyTuneIII” to find out more amazing features by themselves. For further technical information, please link to: http://www.gigabyte.com.tw Note: If your TUCD version is 1.6 or below, please visit our website and...
  • Page 58: Raid Introduction

    7ZXR Series Motherboard RAID Introduction (Optional) What is RAID? This motherboard implements two different types of RAID levels as follows: RAID 0 (stripe) For capacity -- The motherboard array will be as big as the smallest HDD in the array times however many HDDs are in the array.
  • Page 59 RAID Introduction About RAID Levels Striping (RAID 0) Reads and writes sectors of data interleaved between multiple drives. When any disk member fails, it affects the entire array. Performance is better than a single drive since the workload is balanced between the array members. This array type is for high performance systems. Identical drives are recommended for performance as well as data storage efficiency.
  • Page 60 7ZXR Series Motherboard Mirroring (RAID 1) Writes duplicate data on to a pair of drives while reads are performed in parallel. ATA RAID 1 is fault tolerant because each drive of a mirrored pair is installed on separate IDE channels. If one of the mirrored drives suffers a mechanical failure (e.g.
  • Page 61 RAID Introduction Creating Your Disk Array You will now use the FastBuild BIOS utility to create your array using the attached drives. There are two different scenarios in creating this array. You can create an array for performance, you can create a Security array using new hard drives (recommended). WARNING: If creating a Security array using an existing hard drive, backup any necessary data.
  • Page 62 7ZXR Series Motherboard Creating an Array for Performance NOTE: This motherboard allows users to create striped arrays with 1, 2 drives. To create an array for best performance, follow these steps: Using the Spacebar, choose “Performance” under the Optimize Array for section.
  • Page 63 RAID Introduction Creating a Security Array With An Existing Data Drive NOTE: This motherboard permits only two drives to be used for a single Mirrored array in Auto Setup. You would use this method if you wish to use a drive that already contains data and/or is the bootable system drive in your system.
  • Page 64 7ZXR Series Motherboard Use the arrow keys to choose which drive contains the existing data to be copied. Press [Ctrl-Y] keys to Save selection and start duplication. The following progress screen will appear. Start to duplicate the image . . .
  • Page 65: Using Fastbuild™ Configuration Utility

    RAID Introduction Using FastBuild™ Configuration Utility The FastBuild TM Configuration Utility offers several menu choices to create and manage the drive array on the motherboard. For purposes of this manual, it is assumed you have already created an array in the previous chapter and now wish to make a change to the array or view other options.
  • Page 66 7ZXR Series Motherboard Navigating the FastBuild™ Setup Menu When using the menus, these are some of the basic navigation tips: Arrow keys highlights through choices; [Space] bar key allows to cycle through options; [Enter] key selects an option; [ESC] key is used to abort or exit the current menu.
  • Page 67 RAID Introduction Creating Arrays Automatically The Auto Setup <1> selection from the Main Menu can intuitively help create your disk array. It will assign all available drives appropriate for the disk array you are creating. After making all selections, use Ctrl-Y to Save selections. FastBuild will automatically build the array. FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
  • Page 68 7ZXR Series Motherboard Defining Typical Application Usage Allows the user to choose the type of PC usage that will be performed in order to optimize how This motherboard handles data blocks to enhance performance. Your choice will determine the block size used. You may choose from: A/V Editing (for audio/video applications, or any similar application that requires large file transfers), Server (for numerous small file transfers), or Desktop (a combination of large and small file sizes).
  • Page 69 RAID Introduction Viewing Drive Assignments The View Drive Assignments <2> option in the Main Menu displays whether drives are assigned to a disk arrays or are unassigned. Under the “Assignment” column, drives are labeled with their assigned disk array or shown as “Free”...
  • Page 70 7ZXR Series Motherboard Manually Creating an Array The Define Array <3> option from the Main Menu allows users to begin the process of manually defining the drive elements and RAID levels for one or multiple disk arrays attached to this motherboard.
  • Page 71 RAID Introduction Selecting Array Type Under the Definition section of this menu, highlight the Array # for which you want to assign a RAID level. Use the [Space] key to cycle through two array types: Performance (RAID 0 Striping), Security (RAID 1 Mirroring). FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
  • Page 72 7ZXR Series Motherboard Press <Ctrl-Y> to save the disk array information. Depending on the array type selected, the following scenarios will take place: If choosing a Striping array, the initial Define Array Menu screen will appear with the arrays defined. From there you may ESC to exit and return to the Main Menu of FastBuild.
  • Page 73 RAID Introduction After assigning the drives to a Mirroring array, press <Ctrl-Y> keys to Save your selection. The window below will appear. Do you want the disk image to be duplicated to another? (Yes/No) Y - Create and Duplicate N - Create Only Press “Y”...
  • Page 74 7ZXR Series Motherboard Once mirroring is complete, the following screen will appear confirming that your Security array has been created. Press any key to reboot the system Array has been created. <Press Any Key to Reboot> Making a Disk Array Bootable...
  • Page 75 RAID Introduction How Orders Arrays During startup, the disk arrays on the motherboard are recognized in this order: 1) The array set to bootable in the FastBuild TM Setup, and 2) the Array number (i.e. Array 0, Array 1…). This would be involved in determining which drive letters will be assigned to each disk array. How Saves Array Information All disk array data is saved into the reserved sector on each array member.
  • Page 76 7ZXR Series Motherboard Deleting An Array The Delete Array <4> Menu option allows for deletion of disk array assignments. This is not the same as deleting data from the drives themselves. If you delete an array by accident (and before it has been used again), the array can normally be recovered by defining the array identically as the deleted array.
  • Page 77 RAID Introduction Confirm yes to the following warning message with the <Ctrl-Y> key to continue array deletion: Are you sure you want to delete this array? Press Ctrl-Y to Delete, others to Abort After deleting the array, you should create a new array using Auto Setup or the Define Array menu from the FastBuild Main Menu.
  • Page 78 7ZXR Series Motherboard Rebuilding A Mirrored Array The Rebuild Array <5> Menu option is necessary to recover from an error in a mirrored disk array. You will receive an error message when booting your system from the BIOS. NOTE: Drives MUST be replaced if they contain any physical errors.
  • Page 79 RAID Introduction FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc. [ Rebuild Array Menu ] Array No RAID Mode Total Drv Status Array 2 Mirror Critical Stripe Block: Not Available [ Select Drive for Rebuild ] Channel:ID Drive Model Capacity (MB) 1 : Slave QUANTUMCR8.4A...
  • Page 80 7ZXR Series Motherboard Viewing Controller Settings The Controller Configuration <6> menu selection allows you to enable or disable the BIOS from halting (the default) if it detects an error on boot up. You may also view the system resources (Interrupt and I/O port address) of data channels.
  • Page 81: Memory Installation

    Memory Installation Memory Installation The motherboard has 3 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot .The DIMM module can only fit in one direction due to the two notch. Memory size can vary between sockets.
  • Page 82: Page Index For Bios Setup

    7ZXR Series Motherboard Page Index for BIOS Setup Page The Main Menu P.77 Standard CMOS Setup P.79 BIOS Features Setup P.82 Chipset Features Setup P.84 Power Management Setup P.88 PNP/ PCI Configuration P.91 Load BIOS Defaults P.94 Load Setup Defaults P.95...
  • Page 83: Entering Setup

    BIOS Setup BIOS Setup BIOS Setup is an overview of the BIOS Setup Interface. The interface allows users to modify the basic system configuration, which is stored in battery-backed CMOS RAM so that it retains the Setup information can be retained when the power is turned off. ENTERING SETUP Power ON the computer and press <Del>...
  • Page 84: Getting Help

    7ZXR Series Motherboard GETTING HELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.
  • Page 85 BIOS Setup Power Management Setup This setup page includes all the adjustable items of Green function features. PnP/PCI Configurations This setup page includes all the adjustable configurations of PCI & PnP ISA resources. Load Fail-Safe Defaults Load Fail-Safe Defaults option loads preset system parameter values to set the system in its most stable configurations.
  • Page 86: Standard Cmos Setup

    7ZXR Series Motherboard Standard CMOS Setup The items in Standard CMOS Setup Menu (Figure 2) are divided into 9 categories. Each category includes none, one or more than one setup items. Use the arrows to highlight the item and then use the <PgUp> or <PgDn> keys to select the value in each item.
  • Page 87 BIOS Setup Time The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. Primary Master / Slave , Secondary Master / Slave The category identifies the type of hard disk from drive C to F that has been installed in the computer.
  • Page 88: Extended Memory

    7ZXR Series Motherboard Boot Sector Virus Protection If it is set to enable, the category will flash on the screen when there is any attempt to write to the boot sector or partition table of the hard disk drive. The system will halt and the following error message will appear in the mean time.
  • Page 89: Bios Features Setup

    BIOS Setup BIOS Features Setup AMIBIOS SETUP – BIOS FEATURES SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved 1st Boot Device Floppy 2nd Boot Device IDE-0 3rd Boot Device CDROM S.M.A.R.T. for Hard Disks Disabled BootUp Num-Lock Floppy Drive Seek Enabled Password Check...
  • Page 90: Password Check

    7ZXR Series Motherboard S.M.A.R.T. for Hard Disks Enabled Enabled S.M.A.R.T. Hard for Disks. Disable S.M.A.R.T. Hard for Disks. (Default Value) Disabled Boot Up Num-Lock Keypad is number keys. (Default Value) Keypad is arrow keys. Floppy Drive Seek During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks. 360 type is 40 tracks while 720 , 1.2 and 1.44 are all 80 tracks.
  • Page 91: Chipset Features Setup

    BIOS Setup Chipset Features Setup AMIBIOS SETUP – CHIPSET FEATURES SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved *********DRAM Timing*** SDRAM Command Drive 24 mA Top Performance Disabled Memory Address Drive 24 mA DRAM Frequency 100MHz CAS# Drive 12 mA SDRAM CAS# Latency RAS# Drive...
  • Page 92: Usb Controller

    7ZXR Series Motherboard AGP Fast Write Enabled Enable this function only if the AGP Card support Fast Write Function. (Enable this function can increase AGP performance). Disable this function. (Default Value) Disabled AGP Mode Set AGP Mode to 4X. (Default Value) Set AGP Mode to 1X.
  • Page 93 BIOS Setup USB Legacy Support Keyboard/FDD Set USB Legacy Support Keyboard / Floppy. KB/Mouse/FDD Set USB Legacy Support Keyboard / Mouse /Floppy. Disable USB Legacy Support Function. (Default Value) Disabled USB Port 64/60 Emulation Enabled To use USB mouse under Win NT environment, set USB Legacy Support to KB/Mouse/FDD and USB Port 64/60 Emulation to enabled.
  • Page 94 7ZXR Series Motherboard SDRAM Command Drive 16 mA Set SDRAM Command Drive 16 mA. Set SDRAM Command Drive 24 mA. (Default Value) 24 mA Memory Address Drive 16 mA Set Memory Address Drive 16 mA. Set Memory Address Drive 24 mA. (Default Value)
  • Page 95: Power Management Setup

    BIOS Setup Power Management Setup AMIBIOS SETUP – POWER MANAGEMENT SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved ACPI Sleep Type S1/POS RTC Alarm Date Every Day USB Dev Wakeup From S3-S5 Disabled RTC Alarm Hour Suspend Time Out(Minute) Disabled RTC Alarm Minute Display Activity...
  • Page 96 7ZXR Series Motherboard Suspend Time Out (Minute.) Disable Suspend Time Out Function. (Default Value) Disabled 1~60 Set the timer to enter Suspend Time Out . Display Activity Ignore Display Activity . (Default Value) Ignore Monitor Monitor Display Activity. IRQ 3~IRQ15 Ignore Ignore IRQ3 ~IRQ15.
  • Page 97 BIOS Setup Resume On RTC Alarm You can set “Resume On RTC Alarm” item to enabled and key in Data/time to power on system. Disable this function. (Default Value) Disabled Enabled Enable alarm function to POWER ON system. If the “Resume On RTC Alarm” is Enabled. RTC Alarm Date : Every Day, 1~31 RTC Alarm Hour:...
  • Page 98: Reset Configuration Data

    7ZXR Series Motherboard PnP/PCI Configurations AMIBIOS SETUP – PNP / PCI CONFIGURATION ( C ) 1999 American Megatrends, Inc. All Rights Reserved PnP OS Installed Reset Configuration Data VGA Boot from PCI AGP Palette Snoop Disabled PCI Slot 1/5 IRQ Priority...
  • Page 99 BIOS Setup PCI Slot 1,5 IRQ Priority Auto The system will reserved a free IRQ for PCI slot 1 & 5 device. (Default Value) The system will reserved IRQ3 for PCI slot 1 & 5 device if no legacy ISA device using IRQ3. The system will reserved IRQ4 for PCI slot 1 &...
  • Page 100 7ZXR Series Motherboard PCI Slot 3 / 4 IRQ Priority Auto The system will reserved a free IRQ for PCI slot 3 / 4 device. (Default Value) The system will reserved IRQ3 for PCI slot 3 / 4 device if no legacy ISA device using IRQ3.
  • Page 101: Load Fail-Safe Defaults

    BIOS Setup Load Fail-Safe Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24e ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR & MISC SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER PASSWORD PNP/PCI CONFIGURATION IDE HDD AUTO DETECTION...
  • Page 102: Load Optimized Defaults

    7ZXR Series Motherboard Load Optimized Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24e ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR & MISC SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP...
  • Page 103: Integrated Peripherals

    BIOS Setup Integrated Peripherals AMIBIOS SETUP – INTEGRATED PERIPHERALS ( C ) 1999 American Megatrends, Inc. All Rights Reserved OnBoard IDE Enabled Both Game Port(200h-207h) Enhance ATAPI Performance Disabled OnBoard Serial Port A Auto Auto OnBoard Serial Port B Normal Serial PortB Mode Duplex Mode Auto...
  • Page 104 7ZXR Series Motherboard On Board Serial Port A BIOS will automatically setup the port A address. (Default Value) Auto 3F8/COM1 Enable on Board Serial port A and address to 3F8. 2F8/COM2 Enable on Board Serial port A and address to 2F8.
  • Page 105 BIOS Setup Parallel Port Mode Using Parallel port as Enhanced Parallel Port. Using Parallel port as Extended Capabilities Port. (Default Value) Normal Normal Operation. EPP+ECP Using Parallel port as Enhanced Parallel Port & Extended Capabilities Port. Parallel Port DMA Set Auto to parallel port mode DMA Channel. (Default Value) Auto Set Parallel Port DMA to 3.
  • Page 106 7ZXR Series Motherboard SB I/O Base Address SB I/O Base Address to 220h-22Fh. (Default Value) 220h-22Fh SB I/O Base Address 280h-28Fh to 280h-28Fh. SB I/O Base Address 260h-26Fh to 260h-26Fh. SB I/O Base Address 240h-24Fh to 240h-24Fh. SB IRQ Select IRQ 5 / 7 / 9 / 10.
  • Page 107: Hardware Monitor

    BIOS Setup Hardware Monitor AMIBIOS SETUP – HARDWARE MONITOR & MISC SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Front Side Bus Clock (MHz) By Jumper CPU Temperature 32 C/89 F System Temperature 32 C/89 F CPU Fan Speed 7123 RPM System Fan Speed 0 RPM...
  • Page 108: Set Supervisor / User Password

    7ZXR Series Motherboard Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24e ( C ) 1999 American Megatrends, Inc. All Rights Reserved...
  • Page 109: Ide Hdd Auto Detection

    BIOS Setup IDE HDD AUTO Detection AMIBIOS SETUP – STANDARD CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Tue Jan 25, 2000 Time (hh/mm/ss) : 10:36:24 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Pri Master : Not Installed Pri Slave : Not Installed...
  • Page 110: Save & Exit Setup

    7ZXR Series Motherboard Save & Exit Setup AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24e ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR & MISC SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD...
  • Page 111: Exit Without Saving

    BIOS Setup Exit Without Saving AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24e ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR & MISC SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER PASSWORD PNP/PCI CONFIGURATION IDE HDD AUTO DETECTION...
  • Page 112: Appendix

    7ZXR Series Motherboard Appendix Appendix A : VIA KT133 Chipsets Driver Installation (For example : TUCD1.6) A.VIA 4 in 1 Service Pack Utility: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen.
  • Page 113 Appendix 7.Click “Next”. 6.Click “Next”. 9.Click “Next”. (10) 10.Click “Finish” to restart computer.
  • Page 114 7ZXR Series Motherboard Appendix B: Creative Sound Driver Installation Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. Audio 2.Click “OK”.
  • Page 115 Appendix 7.Click here. 8.Click”Next” 9.Click “Finish” to restart computer.
  • Page 116 7ZXR Series Motherboard Appendix C: Promise PCI Device Installation (Optional) A. Promise ATA100 Driver Installation: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen.
  • Page 117 Appendix 8.Click Next 9.Click Next 10.Type”D:\Other\Promise\ata100\win95-98” 12.Click Next 11.Click Next. (10) 14.Click “Yes” to restart 13.Click Finish your system. (12) (11)
  • Page 118 7ZXR Series Motherboard B. FastTrak Utility Installation: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. 2.Click “FastTrak Utilities Installation”. 1.Click “Promise PCI Device..”.
  • Page 119 Appendix 6.Click “Next” 7.Click “Next” 9.Click “Next” 8.Click “Next” (10) 10.Click “Next” 11.Click “Finish” to restart. (11) (12)
  • Page 120 7ZXR Series Motherboard C. Promise RAID Driver Installation: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. 2. Please refer “Driver Information”...
  • Page 121 Appendix Appendix D: BIOS Flash Procedure BIOS update procedure: If your OS is Win9X, we recommend that you used Gigabyte @BIOS Program to flash BIOS. Click “Tool” . Click “@BIOS Writer v1.05” Click “ ” . Click Here. Methods and steps : I.
  • Page 122 In method I, if the BIOS file you need cannot be found in @BIOS server, please go onto Gigabyte's web site for downloading and updating it according to method II. d. Please note that any intercorruption during updating will cause system unbooted...
  • Page 123 Format a bootable system floppy diskette by the command “ format a:/s ” in command mode. Visit the Gigabyte website at http:// www.gigabyte.com.tw ,Select the BIOS file you need and download it to your bootable floppy diskette.
  • Page 124 7ZXR Series Motherboard Appendix E: Acronyms Acronyms Meaning ACPI Advanced Configuration and Power Interface Advanced Power Management Accelerated Graphics Port Audio Modem Riser Advanced Communication Riser BIOS Basic Input / Output System Central Processing Unit CMOS Complementary Metal Oxide Semiconductor...
  • Page 125 Appendix Acronyms Meaning Original Equipment Manufacturer PCI A.G.P. Controller POST Power-On Self Test Peripheral Component Interconnect RIMM Rambus in-line Memory Module Special Circumstance Instructions SECC Single Edge Contact Cartridge SRAM Static Random Access Memory Symmetric Multi-Processing System Management Interrupt Universal Serial Bus Voltage ID...

This manual is also suitable for:

Ga-7zxr

Table of Contents