Related Manuals for Roborock Q7 Max
Summary of Contents for Roborock Q7 Max
- Page 1 Roborock Q7 Max Robotic Vacuum Cleaner User Manual Read this user manual with diagrams carefully before using this product and store it properly for future reference.
- Page 3 English Français Español...
-
Page 4: Table Of Contents
English Contents Safety Information Battery and Charging FCC IC Statement Product Overview Installation Connect to the App Instructions Routine Maintenance Basic Parameters Errors FAQs... -
Page 5: Safety Information
Safety Information • For use only with roborock CDZ11RR, CDZ12RR, AED03LRR or AED04LRR. • Place the cords from other appliances out of the area to be cleaned. • Do not operate the vacuum in a room where an infant or child is sleeping. -
Page 6: Fcc Ic Statement
(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Correspondence of the responsible party in USA Company Roborock Technology Co. Address 108 West 13th Street, Wilmington, Delaware 19801. Email support@roborock.com... -
Page 7: Product Overview
Product Overview A2-7—Main Brush Mop Cloth A2-8—Main Brush Cover Latches A8-1—Mop Cloth Robot (Top View) A8-2—Hook and Loop Pads Robot (Upper Cover Open) —Power/Clean A3-1—WiFi Indicator Light Moisture-Proof Mat • Press and hold to turn the robot on or off •... - Page 8 Roborock branded floor cleaner in the water tank. • Do not use hot water as this may cause the tank to deform. to items becoming tangled in, struck by, or Moisture-Proof Mat will be located.
-
Page 9: Connect To The App
WiFi indicator to its scan of the room. It splits a room into flashes slowly. The robot will then wait for a Option 1: Search for “Roborock” in the App zones, first draws out zone edges, and then connection. - Page 10 Error Notes: Notes: • To allow the robot to automatically vacuum and return • The robot will not go to sleep when it is charging. If an error occurs, the power indicator will to the dock, start the robot from the dock. Do not •...
-
Page 11: Routine Maintenance
Custom Cleaning Modes C1-4—Main Brush Caps C3-1—Use a tool, such as a small screwdriver, • Scheduled C1-5—Main Brush Bearing to pry out the axle and take out the • Selective Room wheel. C1-6—Turn over the robot and press the • Zone latches to remove the main brush cover. -
Page 12: Basic Parameters
Basic Parameters Note: Purchase an additional filter and alternate if necessary. Robot Mop Cloth * Clean after each use and replace every 3-6 months Model Q380RR Remove the mop cloth from mop cloth 14.4V/5200mAh Battery mount. Clean the mop cloth and air-dry it. lithium-ion battery Note: A dirty mop will affect the mopping performance. -
Page 13: Errors
If the problem persists after using the recommendations in the Error 8: Robot trapped. Clear obstacles surrounding robot. table above, contact our support team at: support@roborock.com (United States/Canada/Non-Europe) Error 9: No dustbin. Install dustbin and filter. 1-855-960-4321 (United States only) Error 12: Low battery. -
Page 14: Faqs
• Unable to connect to WiFi. There may be an error • The wall sensor or cliff sensors may be dirty. Clean to miss certain with your router settings. Contact Roborock them with a soft, dry cloth. spots. Customer Service for help with troubleshooting.
Need help?
Do you have a question about the Q7 Max and is the answer not in the manual?
Questions and answers
where is the washable filter
The exact location of the washable filter on the Roborock Q7 Max is not provided in the context.
This answer is automatically generated