Related Manuals for Roborock Q7 Series
Summary of Contents for Roborock Q7 Series
- Page 1 Roborock Q7 Series Robotic Vacuum Cleaner User Manual Read this user manual with diagrams carefully before using this product and store it properly for future reference.
-
Page 3: Table Of Contents
Contents 04 Safety Information 05 Battery and Charging 05 International Symbols Explanation English 06 FCC/IC Statement Français 07 Product Overview Español (Latinoamérica) 07 Installation Português (Brasil) 09 Connecting to the App 09 Instructions for Use 10 Routine Maintenance 11 Basic Parameters 11 ... -
Page 4: Safety Information
Safety Information WARNING • For the purposes of recharging the battery, only use with roborock AED08LRR or SPCDZ03RR (use with roborock BLJ18WD200080P-U power supply) docking station. • The product must be switched off and the plug must be removed from socket outlet when not in use, before cleaning or maintaining the product. -
Page 5: Battery And Charging
• Always operate the device in well-ventilated areas to prevent overheating. • Roborock disclaims all liability for indirect, punitive, incidental, or consequential damages resulting from the use, misuse, or inability to use this product. This disclaimer does not affect any statutory rights that may not be disclaimed under applicable law. -
Page 6: Fcc/Ic Statement
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Correspondence of the responsible party in USA Company Roborock Technology Co. Address ROOM 1227, 12TH FLOOR, 1000 N. WEST STREET, WILMINGTON, DE 19801 Email... -
Page 7: Product Overview
Product Overview Installation A2-3—Omnidirectional Wheel A2-4—Main Brush Cover Latches Robot (Top View) A2-5—Main Brush Important Information A2-6—Main Wheels Power/Clean A2-7—Mop Module • Press and hold to turn the robot on or off Dustbin and Water Tank • Press to start cleaning Combo Unit Power Indicator Light A3-1—Water Tank... - Page 8 • To prevent damage, do not use any disinfectant and Wait until the power indicator light is steady only use cleaning solution recommended by Roborock. that the location has good WiFi coverage for • Dampen the mop cloth and wring it until it stops white, and then place the robot to the dock.
-
Page 9: Connecting To The App
1. Download the App • Only 2.4 GHz WiFi is supported. Search for “Roborock” in the App Store or Pause Google Play or scan the QR code to When the robot is running, press any download and install the app. -
Page 10: Routine Maintenance
Error Routine Maintenance Omnidirectional Wheel * Clean as required. If an error occurs, the power indicator light C4-1— Use a tool, such as a small Main Brush will flash red. A pop-up notification will appear screwdriver, to pry out the axle and in the app and a voice alert may sound. -
Page 11: Basic Parameters
Environment Basic Parameters Washable Filter * Clean every 2 weeks and replace every 6-12 months. Protection Information Robot C8-1— Open the lid of the dustbin and water tank combo unit as shown, Removing the battery Model RRA0TCP press the filter holder latches to pull * The following information applies only when disposing 14.4V/3200mAh (TYP) out the filter holder. -
Page 12: Common Issues
Roborock customer service for help with troubleshooting. Robot becomes offline • Check that your robot is connected to Roborock app and is always within WiFi coverage. • The main brush, side brush, or main wheels may be jammed. Turn off the robot and clean them. - Page 13 Common Issues Issue Solution • When used at high or low temperatures, the robot will automatically reduce its charging speed to extend battery life. Slow charging • Charging contacts dirty. Wipe them with a soft, dry cloth. Is power always being drawn when the •...
Need help?
Do you have a question about the Q7 Series and is the answer not in the manual?
Questions and answers