Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DALBO CULTILIFT 300
Summary of Contents for DALBO CULTILIFT 300
- Page 1 CULTILIFT 300/500/600/700/800 cm Serial no.: 00100 – XXXX...
- Page 3 Congratulations on the purchase of your new CULTILIFT. For safety reasons and to achieve op- timum service from the product, please read the User Guide before use. © Copyright 2010. All rights reserved, DALBO A/S This product has: Type no.: Serial no.:...
-
Page 5: Table Of Contents
Table of Contents SAFETY ............................6 ..............................6 ENERAL ..............................6 YDRAULICS ..............................7 SSEMBLY ..........................7 AINTENANCE AND REPAIR ............................7 OAD TRANSPORT .............................7 ORRECT USE TECHNICAL DATA ........................... 9 ..............................9 ELIVERY HOW TO USE THIS MANUAL ......................10 USES ............................11 CONNECTING AND DISCONNECTING .................... 12 ............................ -
Page 6: Safety
CULTILIFT Safety This symbol appears in the instruction manual each time there is a safety warning concerning your safety, the safety of others or functionality of the machine. All safety instructions must be observed and made available to all users of the machine. General •... -
Page 7: Assembly
CULTILIFT • Check hydraulic hoses regularly for defects such as cracks, splits, crimps, wear or breaks. Defective hoses must be replaced immediately. • Avoid spilling oil on the ground. If oil is spilt, collect and deliver to a destruction point. •... - Page 8 CULTILIFT • The machine may only be used, maintained or repaired by personnel familiar with it and who are aware of the risks that can be involved. • The manufacturer cannot be held liable for injury or damage arising from modifi- cations made to the machine performed without prior permission from the man- ufacturer.
-
Page 9: Technical Data
CULTILIFT Technical data CULTILIFT Model/working width (cm) HP (recommended) Gross weight kg: 2225 2500 2975 Transport width (cm) Tines (no.) Delivery CULTILIFT is delivered complete on a trailer or towed by a tractor. The machine can be partially dismantled if exported. If lifting the machine, we recommend the use of straps on the mid-section and draw- bar to maintain balance. -
Page 10: How To Use This Manual
CULTILIFT How to use this manual The sequence of subject matter in this manual can seem illogical. Please refer to the table of contents for page numbers for individual items. The manual is divided into main sections: • Safety • Starting routine and running •... -
Page 11: Uses
CULTILIFT Uses CULTILIFT is a 4-bulled, lift-suspended sowing harrow with three working units con- nected to the tractor's three-point lift. The machine is designed to run smoothly over the field, and its roller cage helps en- sure uniform cultivation depth. Fig. -
Page 12: Connecting And Disconnecting
CULTILIFT Connecting and disconnecting Connecting Fig. 2 1. Connect the tractor lift arms (A). 2. Connect the top arm (B). Remember to secure with a split pin. 3. Secure the lock cable in the tractor cabin 4. Fit hydraulic hoses. Hydraulics A double action outlet is required to connect CULTILIFT. -
Page 13: Disconnection
CULTILIFT Disconnection Fig. 3 CULTILIFT can be disconnected when extended or retracted. Remember to depressurise hoses be- fore disconnecting them. Check side section safety hooks are locked before disconnection (A) fig. 3. Place the machine on a firm, flat surface. Lower the lift arms and disconnect the ma- chine. -
Page 14: Setting Up
CULTILIFT Setting up CULTILIFT is supplied with factory settings, but fine adjustment will always be re- quired before use. Numerous adjustment options make the machine more flexible and ensure maximum use. Basic setting Fig. 4 The main frame (A) must be horizontal when working to achieve optimum re- sults. -
Page 15: Adjusting Post-Harrower
CULTILIFT Adjusting post-harrower Fig. 7 Depending on working depth and soil conditions, the post-harrower (optional extra) between the last row of harrow tines and the roller cage must be ad- justed. The post-harrower can be vertically ad- justed using the holes (A). It can also be angled using the holes (B), for less ag- gressive cultivation. -
Page 16: Adjusting The Spring-Suspended Levelling Board
CULTILIFT Adjusting the spring-suspended levelling board Fig. 8 The front working unit, the levelling board, can be mechanically adjusted using cranks. Depth is indicated on a numerical scale on each crank. The board is intended to work as a dozer blade, to avoid dragging large amounts of ... -
Page 17: Operation
CULTILIFT Operation Correct operation is vital for optimum use. This applies to working in the field and for safety. We recommend that the final pass is made at a slight angle to the following direction of sowing. This achieves a uniform finish. ... - Page 18 CULTILIFT Fig. 10 Check that the automatic transporta- tion lock (A) is engaged with the side sections after retraction. Page 18...
-
Page 19: Operating Speed
CULTILIFT When transporting on public highways, always check that the harrow is fully re- tracted and locks engaged. Operating speed To achieve optimum cultivation, a speed of between 8 and 12 km/h is required. But always work according to the conditions. Please note that wear increases significantly in line with the speed. -
Page 20: Maintenance
CULTILIFT Maintenance Good maintenance ensures long service life and optimum use. Grease nipples are fit- ted where wear is heaviest. Tighten all screw connections after first working day. Check all split pins and bolts to avoid mechanical failure. Check hydraulic system for leaks. All maintenance and repair work can only be performed when the machine is low- ered to the ground, the tractor is braked, engine stopped and ignition key removed to prevent accidental start and crushing. -
Page 21: Hydraulics
CULTILIFT Lubricate all lubrication points at least once annually. Hydraulics Check all hydraulic hoses for wear or cracks. Check all hoses for crimping. Lubricate exposed rams with oil or pressure-resistant grease to avoid rust forming when storing for long periods. Remember to remove before use. Tips The tips of the tines are reversible and must be turned before wear occurs on the tine. -
Page 22: Replacement Andrepairs
CULTILIFT Replacement andrepairs Safety is vital for all repair work. Always observe the following points, plus those un- der Safety First in the instruction manual. All maintenance and repair work can only be performed when the machine is low- ered to the ground, the tractor is braked, engine stopped and ignition key removed to prevent accidental start. -
Page 23: Replacing Tips
CULTILIFT Activate extend/retract cylinders after fitting until they show a little movement. Re- verse cylinders until they return to start position. Move cylinders backwards and forward several times. Ensure no personnel are within the extension radius of the side sections. Replacing tips Support implement securely to avoid danger of crushing or falling Fig. -
Page 24: Scrapping
CULTILIFT Scrapping Depressurise hydraulic system Beware of the weight of any given part when removing or disassembling. All parts must be supported or lifted to avoid danger of falling. Disconnect hydraulic hoses and cylinders and drain oil. Collect oil in container to avoid pollution. -
Page 25: Spare Parts
CULTILIFT Spare parts Page 25...