F&F WB-2 Quick Start Manual

WB-2
3-position switch
Do not dispose of this device in the trash along with other waste! According to the Law on
Waste, electro coming from households free of charge and can give any amount to up to
that end point of collec� on, as well as to store the occasion of the purchase of new equip-
ment (in accordance with the principle of old-for-new, regardless of brand). Electro thrown
in the trash or abandoned in nature, pose a threat to the environment and human health.
Purpose
The WB-2 three-position switch is used to control devices from
the switchboard. It allows you to alternately trigger one of the
two outputs.
Mounting
1. Disconnect the power supply.
2. Install the switch on the rail in the distribution board.
3. Connect the power wires according to the diagram.
4. Check the correct connection.
5. Connect the power supply.
6. Check the correct operation of the system.
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -