Water Valve Disassembly Method; Fan And Fan Motor Disassembly Method - LG LMXS27676D Service Manual

3-20 WATER VALVE DISASSEMBLY METHOD

1) Turn off the water to unit. Remove the waterline from the
valve.
2) Remove cover and 1 screw from the valve.
Mechanical Cover
3) Separate the housing and remove the valve.
Housing
4) Remove the clip, and press the collet to separate the
tube from the connector. Note: there maybe some water
in the line.
3-21 FAN AND FAN MOTOR DISASSEMBLY
METHOD
1) Remove screws for the Drain Pipe Assembly and the 1
connected to the Motor Cover.
Figure 59
2) Separate the Fan Assembly and Motor, turn counter
clockwise to remove from the motor shaft.
Figure 60
Assemble in reverse order. Taking care to avoid.
1. Do not to bend the tube during assembly.
2. Press the Water Dispenser button letting water pour out,
this checks for any leaks in the tube connection, this may
vary depending on the water pressure
( about 2 minutes.).
Figure 61
Figure 62
- 1 -
MOTOR COVER
Figure 63
FAN ASSEMBLY MOTOR
Figure 64