Table of Contents
Advertisement
3-21 WATER VALVE DISASSEMBLY METHOD
1) Turn off the water to unit. Remove the waterline from the
valve.
2) Remove cover and 1 screw from the valve.
Mechanical Cover
3) Separate the housing and remove the valve.
Housing
4) Remove the clip, and press the collet to separate the
tube from the connector. Note: there maybe some water
in the line.
3-22 FAN AND FAN MOTOR DISASSEMBLY
1) Remove screws for the Drain Pipe Assembly and the 1
connected to the Motor Cover.
Figure 60
2) Separate the Fan Assembly and Motor, turn counter
clockwise to remove from the motor shaft.
Figure 61
Assemble in reverse order. Taking care to avoid.
1. Do not to bend the tube during assembly.
2. Press the Water Dispenser button letting water pour out,
this checks for any leaks in the tube connection, this may
vary depending on the water pressure
( about 2 minutes.).
Figure 62
Figure 63
METHOD
FAN ASSEMBLY
MOTOR COVER
Figure 64
MOTOR
Figure 65
Advertisement
Table of Contents
Troubleshooting
