4.7. CHIPSET FEATURES SETUP
Figure 4.4: Chipset Features Setup
# These three items will be available when Auto Configuration is set to
Disabled.
*
These two item will be available when SDRAM Clock Frequency is set to
Disabled.
Auto Configuration
The default value is Enabled.
Enabled
For 50 - 60ns EDO DRAM Timing.
Disabled
For slow speed DRAM Timing.
RAS Pulse width Refresh
The default value is 4T
4T
Set RAS Pulse width Refresh to 4T.
5T
Set RAS Pulse width Refresh to 5T.
6T
Set RAS Pulse width Refresh to 6T.
7T
Set RAS Pulse width Refresh to 7T.
4-14
BIOS Configuration