SDRAM WR Retire Rate
The default value is X-1-1-1
X-1-1-1
Set SDRAM WR Retire Rate to X-1-1-1.
X-2-2-2
Set SDRAM WR Retire Rate to X-2-2-2.
CPU to PCI Burst Mem. WR
The default value is Enabled
Enabled
Enabled CPU to PCI Burst Mem. WR.
Disabled
Disabled this function.
System BIOS Cacheable
The default value is Enabled.
Enabled
Enable System BIOS cacheable.
Disabled
Disable System BIOS cacheable.
Video RAM Cacheable
The default value is Enabled.
Enabled
Enable video RAM cacheable.
Disabled
Disable video RAM cacheable.
Memory Hole At 15M-16M
The default value is Disabled.
Disabled
Normal Setting.
Enabled
Set Address=15~16MB remap to ISA BUS.
4-16
BIOS Configuration