Chipset Features Setup; Auto Configuration - Gigabyte GA - 586STX User Manual

The default value is Enable.
Enabled Video shadow is enabled.
Disabled Video shadow is disabled.
•
C8000 - CFFFF Shadow / D0000 - DFFFF Shadow
These categories determine whether optional ROM will be copied to
RAM by 16 byte. The default value are Disabled.
Enabled Optional shadow is enabled.
Disabled Optional shadow is disabled.

4.7. CHIPSET FEATURES SETUP

Auto Configuration

L2 (WB) Tag bit Length
SRAM Back-to-Back
NA# Enable
Starting Point of Paging
CAS# Pulse Width (FP)
CAS# Pulse Width (EDO)
RAMW# Assertion Timing
CAS Precharge Time (FP)
CAS Precharge Time (EDO)
SDRAM CAS Latency
SDRAM WR Retire Rate
SDRAM Wait State Control
Enhanced Memory Write
Read Prefetch Memory RD
CPU to PCI Burst Mem. WR
MA Current Rating
Video BIOS Cacheable
Memory Hole at 15M-16M
Figure 4.4: Chipset Features Setup
•
Auto Configuration
The default value is Enabled
ROM PCI / ISA BIOS
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
: Enabled Refresh Cycle Time (us)
RAS Pulse Width Refresh
: 8bit
: Enabled RAS Precharge Time
: Disabled RAS to CAS Delay
: 1T CPU to PCI Post Write
ISA Bus Clock Frequency
: 2T
: 1T
: 3T
: 1T/2T
: 1T/2T
: 2T
: X-1-1-1
: 1WS
: Disabled
: Enabled
ESC : Quit
: Disabled
F1 : Help
: Low
F5 : Old Values
: Enabled
F6 : Load BIOS Defaults
: Disabled
F7 : Load Setup Defaults
4-14
BIOS Configuration
: 15.6
: 6T
: 4T
: 4T
: Disabled
: PCICLK/4
: Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color