Jp20: Front Audio - Gigabyte GA-6PMM User Manual

JP12 : STR LED Connector & DIMM LED
Please note:
Do not remove memory modules while DIMM LED is on. It might cause
short or other unexpected damages due to the 3.3V stand by voltage.
Remove memory modules only when STR function is disabled by jumper
and AC Power cord is disconnected.

JP20: Front Audio

Please note : If you want to use "Front Audio" connector, you must move
11-12,13-14 Jumper.
In order to utilize the front audio header, your chassis must have front audio
connector. Also please make sure the pin assigment on the cable is the same as
the pin assigment on the MB header. To find out if the chassis you are buying
support front audio connector, please contact your dealer.
STR LED Connector External.
1
+
PIN NO.
3, 4,5,6,10,15
1 2
15
16
28
Connectors
DIMM LED
Definition
1 Incase speaker (R)
2 Incase speaker (L)
GND
7 +12V
8,16 NC
9 MIC
11 Front Audio (R)
13 Front Audio (L)
12 Rear Audio (R)
14 Rear Audio (L)