6PMM Series Motherboard
JP7 :USB Device Wake up Selection
Please note , To use "USB Device Wakeup" function, set BIOS setting "USB Dev
Wake up from S3" to ENABLED and enable jumpers JP7&JP11. To prevent user
confusion.
*(Power on the computer and as soon as memory counting starts, press <Del>.
You will enter BIOS Setup. Select the item "POWER MANAGEMENT SETUP",
then select "USB Dev Wake up from S3". Remember to save the setting by
pressing "ESC" and choose the "SAVE & EXIT SETUP" option.)
JP8 : BIOS Write Protection
Please note , To flash/upgrade BIOS on this MB JP8 must be set to 2-3 close. We
recommend JP8 to be set to "1-2 close", whenever user does not need to
flash/upgrade the BIOS.
1
Normal
(Default)
Pin No.
1-2 Close Normal (Default)
2-3 Close USB Device
Wake up
1
1
Normal
Write
(Default)
Protection
Pin No.
Definition
1-2close Write Protection
2-3close Normal (Default)
31
1
Enable
Definition