Gigabyte GA-6PMM User Manual page 72

6PMM Series Motherboard
OnBoard Serial Port 2
Auto
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
Serial Port 2 Mode
ASKIR
Normal
IrDA
Duplex Mode
Half Duplex
Full Duplex
N/A
On Board Parallel port
378
278
3BC
Auto
Disabled
Parallel Port Mode
EPP
ECP
Normal
Parallel Port DMA
Auto
3
1
0
Parallel Port IRQ
7 Set Parallel Port IRQ to 7.
Set Parallel Port IRQ automatically. . (Default Value) .
Auto
5 Set Parallel Port IRQ to 5.
BIOS will automatically setup the port 2 address. (Default Value) .
Enable onboard Serial port 2 and address is 3F8.
Enable onboard Serial port 2 and address is 2F8.
Enable onboard Serial port 2 and address is 3E8.
Enable onboard Serial port 2 and address is 2E8.
Disable onboard Serial port 2.
Set onboard I/O chip IR mode to ASKIR .
Set onboard I/O chip IR mode to Normal. (Default Value)
Set onboard I/O chip IR mode to IrDA.
IR Function Duplex Half.
IR Function Duplex Full.
Disable this function. (Default Value)
Set on board LPT port and address is 378.
Set on board LPT port and address is 278.
Set on board LPT port and address is 3BC.
Set on board LPT port Automatically. (Default Value) .
Disable this function.
Using Parallel port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port. (Default Value)
Normal Operation.
Set Parallel port DMA automatically. (Default Value)
Set Parallel Port DMA to 3.
Set Parallel Port DMA to 1.
Set Parallel Port DMA to 0.
65