Onboard Fdc Controller - Gigabyte GA-6CXC7 User Manual

6CXC7 Series Motherboard

OnBoard FDC Controller

Auto
Disabled
Enabled
OnBoard Serial Port A
Auto
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
OnBoard Serial Port B
Auto
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
Serial Port B Mode
(This item allows you to determine which Serial Port B Mode of onboard I/O chip)
Normal
IrDA
ASKIR
IR Duplex Mode
N/A
Half Duplex
Full Duplex
OnBoard CIR port
Disabled
2E0
3E0
Set OnBoard FDC Controller is Auto.
Disabled OnBoard FDC Controller.
Enabled OnBoard FDC Controller. (Default Value)
BIOS will automatically setup the port A address. (Default Value)
Enable OnBoard Serial port A and address is 3F8.
Enable OnBoard Serial port A and address is 2F8.
Enable OnBoard Serial port A and address is 3E8.
Enable OnBoard Serial port A and address is 2E8.
Disable OnBoard Serial port A.
BIOS will automatically setup the port B address. (Default Value)
Enable OnBoard Serial port B and address is 3F8.
Enable OnBoard Serial port B and address is 2F8.
Enable OnBoard Serial port B and address is 3E8.
Enable OnBoard Serial port B and address is 2E8.
Disable OnBoard Serial port B.
Set onboard I/O chip Serial Port B to Normal Mode. (Default Value)
Set onboard I/O chip Serial Port B to IrDA Mode.
Set onboard I/O chip Serial Port B to ASKIR Mode.
Disabled this function. (Default Value)
IR Function Duplex Half.
IR Function Duplex Full.
Disabled OnBoard CIR port. (Default Value)
Set OnBoard CIR port is 2E0.
Set OnBoard CIR port is 3E0.
71