Gigabyte 8VT800-RZ User Manual page 14

4) SYS_FAN (System FAN Connector)
This connector allows you to link with the cooling fan on the system case to lower the system
temperature.
5) IDE1 / IDE2 (IDE1 / IDE2 Connector)
Im portant Notice: Please connect first hard disk to IDE1 and connect CD-ROM to IDE2. The red
stripe of the ribbon cable must be the sam e side with the Pin1.
6) FDD (Floppy Connector)
Please connect the floppy drive ribbon cables to FDD. It supports 360K,720K,1.2M,1.44M and
2.88M bytes floppy disk types. The red stripe of the ribbon cable must be the same side with the
Pin1.
8VT800-RZ/8VT800-RZ-C Motherboard
Pin No.
1
2
3
1
1
IDE2
IDE1
2
3 4
3 3
2
1
- 14 -
Definition
GND
+12V
Sense
3 9
4 0