Chapter 2: Installation; Cpu; Fan Header - Biostar BIPV10-IAP Setup Manual

CHAPTER 2: INSTALLATION

2.1

CPU

The mainboard includes an embedded Intel Atom N455/N550/D525/D425
processor, and a heatsink has been installed to provide sufficient cooling.
2.2 F H
AN EADER
The fan header supports cooling-fans built in the system.
and connector may be different due to the fan manufacturer.
JSFAN1: System Fan Header
JSFAN2: System Fan Header
Note:
System Fan Headers support 3-pin head connectors. When connecting with wires onto
connectors, please note that the red wire is the positive and should be connected to
pin#2, and the black wire is Ground and should be connected to GND.
BIPV10-IAP
The fan cable
3
Pin Assignment
1
1 Ground
2 +12V Smart
Fan Control (By
Fan)
3 FAN RPM rate
sense
Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate
sense
1 3
7