Biostar BIPV10-IAP Setup Manual page 52

Security
This sub-menu allows you to provide/revise supervisor and user password.
Security Settings
Supervisor Password :Not Installed
User Password :Not Installed
Change Supervisor Password
User Access Level
Change User Password
Clear User Password
Password Check
Boot Sector Virus Protection [Disabled]
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Change Supervisor Password
Setting the supervisor password will prohibit everyone except the supervisor from
making changes using the CMOS Setup Utility. You will be prompted with to enter
a password.
User Access Level
This item allows supervisor to set the user level.
Options: Full Access (Default) / No Access / View Only / Limited
Change User Password
If the Supervisor Password is not set, then the User Password will function in the
same way as the Supervisor Password. If the Supervisor Password is set and the
User Password is set, the "User" will only be able to view configurations but will
not be able to change them.
Clear User Password
This item is for clearing user password.
BIOS SETUP UTILITY
[Full Access]
[Setup]
BIPV10-IAP
Exit
Install or Change the
password.
Select Screen
Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
51