Top Performance; Load Fail-Safe Defaults - Gigabyte 8I845GVM-RZ User Manual

Host/DRAM Clock Ratio
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.
2.0 Memory Frequency = Host clock X 2.0.
2.66 Memory Frequency = Host clock X 2.66.
Auto Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency (Mhz)
The values depend on CPU Host Frequency(Mhz).
PCI/AGP Frequency(Mhz)
The values depend on PCI/AGP Divider.

Top Performance

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
Frequency/Voltage Control
ESC: Quit
F8: Q-Flash
If you wish to maximize the performance of your system, set "Top Performance" as "Enabled".
Disabled Disable this function. (Default Value)
Enabled Enable Top Performance function.
"Top Performance" will increase H/W working speed. Different system configuration (both H/W
component and OS) will effect the result. For example, the same H/W configuration might not run
properly with Windows XP, but works smoothly with Windows NT. Therefore, if your system is not
perform enough, the reliability or stability problem will appear sometimes, and we will recommend you
disabling the option to avoid the problem as mentioned above.
Top Performance
Disabled.........................[ ]
Enabled..........................[ ]
: Move ENTER: Accept
ESC: Abort
- 33 -
Top Performance

Load Fail-Safe Defaults

Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
F10: Save & Exit Setup
BIOS Setup