Pnp/Pci Configurations - Gigabyte 7VT600-RZ User Manual

F
ModemRingOn/WakeOnLAN (When AC Back Function set to [Soft-Off])
You can enable wake on LAN feature by the "ModemRingOn/WakeOnLAN" or "PME Event Wake
up" when the M /B has "WOL" onboard connector. Only enabled the feature by "PME Event Wake
up". An incoming call via modem awakes the system from its soft-off m ode. When set at Enabled,
an input signal comes from the other client.
Server on the LAN awaks the system from a soft off state if connected over LAN.
8Disabled
8Enabled
F
Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
8Disabled
8Enabled
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm :
Time (hh: m m: ss) Alarm :

PnP/PCI Configurations

CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
PCI1/PCI5 IRQ Assignment
PCI2 IRQ Assignment
PCI3 IRQ Assignment
PCI4 IRQ Assignment
higf : Move
Enter: Select
F5: Previous Values
7VT600-RZ Series Motherboard
Disabled Modem Ring On / Wake On LAN function.
Enabled Modem Ring On / Wake On LAN function. (Default Value)
Disable this function. (Default Value)
Enable alarm function to POWER ON system.
Everyday, 1~31
(0~23) : (0~59) : (0~59)
PnP/PCI Configurations
+/-/PU/PD: Value
F6: Fail-Save Default
- 30 -
[Auto]
[Auto]
[Auto]
[Auto]
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
l
u
Menu Leve
F1: General Help