Table of Contents
Advertisement
F
ACPI Suspend Type
8S1(POS)
8S3(STR)
F
USB Device Wakeup From S3(When ACPI Suspend Type is set [S3(STR)])
USB device wakeup From S3 can be set when ACPI standby state set to S3/STR.
8Enabled
8Disabled
F
Power LED in S1 state
8Blinking
8Dual/Off
F
Soft-off by PWRBTN
8Instant-off
8Delay 4 Sec.
F
AC Back Function
8Memory
8Soft-Off
8Full-On
F
Keyboard Power On
This feature allows you to set the m ethod for powering-on the system.
The option "Password" allows you to set up to 8 alphanum eric characters to power-on the system.
The option "Keyboard 98" allows you to use the standard keyboard 98 to power on the system.
8Password
8Disabled
8Keyboard 98
F
Mouse Power On
8Disabled
8Enabled
F
PME Event Wake up
When set at Enabled, any PCI-PM event awakes the system from a PCI-PM controlled state.
This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
8Disabled
8Enabled
Set suspend type to Power On Suspend under ACPI OS(Power On
Suspend). (Default value)
Set suspend type to Suspend To RAM under ACPI OS (Suspend To RAM).
USB Device can wakeup system from S3.
USB Device can' t wakeup system from S3. (Default value)
In standby m ode(S1), power LED will blink. (Default value)
In standby m ode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Press power button then Power off instantly. (Default value)
Press power button 4 sec to Power off. Enter suspend if button is pressed
less than 4 sec.
System power on depends on the status before AC lost.
Always in Off state when AC back. (Default value)
Always power on the system when AC back.
Enter from 1 to 8 characters to set the Keyboard Power On Password.
Disabled this function. (Default value)
If your keyboard have "POWER Key" button, you can press the key to
power on your system .
Can't Power on system by Mouse Event. (Default value)
Can Power on system by M ouse Event.
Disabled PM E Event Wake up function.
Enabled PME Event Wake up function. (Default Value)
- 29 -
BIOS Setup
Advertisement
Table of Contents
