Specifications - Makita DTS141 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Capacities
No load speed
Impacts per minute
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Cd
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately
environmentally compatible recycling
facility.
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Model
Machine screw
Standard bolt
Impact mode (Hard)
Impact mode (Medium)
Impact mode (Soft)
T mode
Impact mode (Hard)
Impact mode (Medium)
Impact mode (Soft)
T mode
Rated voltage
Overall length
Net weight
of the
and returned
4 mm - 8 mm
5 mm - 8 mm
0 - 3,000 min
0 - 2,000 min
0 - 1,200 min
0 - 1,200 min
0 - 2,500 min
0 - 2,200 min
0 - 1,400 min
0 - 1,400 min
D.C. 14.4 V
BL1415,
BL1415N
1.2 kg
END004-6
Noise
The typical
according to EN60745:
(In soft impact force grade)
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
European
Vibration
The vibration
determined according to EN60745:
(In soft impact force grade)
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
to an
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
ENE033-1
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
2
DTS131
-1
-1
-1
-1
-1
-1
-1
-1
136 mm
BL1815,
BL1430,
BL1815N,
BL1440
BL1820
1.4 kg
A-weighted noise
) : 77 dB (A)
pA
Wear ear protection
total value
) : 7.0 m/s
h
2
DTS141
4 mm - 8 mm
5 mm - 8 mm
-1
0 - 3,200 min
-1
0 - 2,000 min
-1
0 - 1,200 min
-1
0 - 1,200 min
-1
0 - 2,700 min
-1
0 - 2,200 min
-1
0 - 1,400 min
-1
0 - 1,400 min
D.C. 18 V
136 mm
BL1830,
BL1840,
BL1850
1.2 kg 1.5 kg
ENG905-1
level determined
ENG900-1
(tri-axial vector sum)
2
ENG901-1