Table of Contents
Advertisement
3.4.
Memory Installation
The motherboard contains four slanted DIMM (Dual Inline
Memory Module) sockets. The system BIOS will auto detect the
size of the memory. To install memory, simply push the memory
modules into the DIMM sockets. (Fig-9)
3.5.
PCI Expansion Card Installation
GS SR102 provides one expansion raiser slot for a peripheral
card, 64Bit/66 MHz full length. To install the peripheral, please
follow these few steps.
a.
There are three screws holding the raiser bracket. First,
remove the screw on the top of the bracket (Fig-10) then
remove the two screws located at the rear. (Fig-11).
System Installation Guide
Fig-9
Advertisement
Table of Contents
