Table of Contents
Advertisement
Available languages
Available languages
IMPoRTAnT
• The appliance must not be exposed to direct solar radiation.
• The appliance must not stand on heating elements, next to
a stove or other heat sources.
• The appliance must be positioned so that the mains plug
is accessible.
• The appliance may only stand in a location where the ambient
temperature corresponds to the climate classification for
which the appliance is designed.
The climate classification can be found on the identification plate
located on the outside of the appliance at the back. The table to
the side here shows which ambient temperature is assigned to which
climate classification:
Test room
Dry bulb
climate class
0
20°C
1
16° C
2
22° C
3
25° C
4
30°C
5
40° C
6
27° C
7
35° C
6.2 Levelling
If the bearing surface is uneven the appliance can be balanced with the
front feet. Turn the foot (34) until the appliance stands firmly on the
ground horizontally and without wobbling.
34
54
Relative
Water weight
Dew point
humidity
in dry air
50%
9.3°C
7.3 g/kg
80%
12.6°C
9.1 g/kg
65%
15.2°C
10.8 g/kg
60%
16.7°C
12 g/kg
55%
20.0°C
14.8 g/kg
40%
23.9°C
18.8 g/kg
70%
21°C
15.8 g/kg
75%
30°C
27.3 g/kg
7
Start-up
7.1 Before starting up for the first time
After transportation the appliance should be left to stand for at least
24 hours so that the refrigerant can collect in the compressor. Non-
observance of this may damage the compressor and so lead to the
appliance malfunctioning. In such a case the warranty becomes invalid.
Clean the interior of the refrigerator and all of the accessories to
be found here with commercially available, mild cleaning products.
WARnInG: Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
cAUTIon: Please take care that the bottom of GCDC800 and
GCDC1050 is not completely covered by bottles in order that the
condensation drain is not disrupted.
The shelf can withstand the maximum load 4.5 kg.
7.2 connecting the appliance to the mains supply
IMPoRTAnT
It is imperative that the appliance be earthed according to
the directions. For this purpose the plug of the connecting
cable is provided with the appropriate contact.
IMPoRTAnT
Call a specialist electrician if the plug does not fit into the
socket. Do not try to force the plug into the socket.
IMPoRTAnT
If you disconnect the appliance from the mains supply, or
if a power cut occurs: wait for 5 minutes before you restart
the appliance.
55
Advertisement
Chapters
Table of Contents
