Levelling; Start-Up; Before Starting Up For The First Time; Connecting The Appliance To The Mains Supply - Gastro-Cool GCDC1050 Instructions For Use Manual

6.2

Levelling

If the bearing surface is uneven, the appliance can be balanced using the front
supports. Rotate the support (34) until the appliance stands firmly on the ground
horizontally and without wobbling.
34
70
7

Start-up

7.1

Before starting up for the first time

After transportation, the appliance should be left to stand for at least 24 hours
so that the refrigerant can separate from the appliance oil and collect in the
compressor. Non-observance of this may damage the compressor and lead to the
appliance malfunctioning. In such a case the warranty becomes invalid.
Clean the interior of the refrigerator and all of the accessories to be found here with
commercially available, mild cleaning products.
!
WARNING: Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
CAUTION: Please ensure that the bottom of appliance is not covered by bottles
to avoid disrupting the condensation drain. It is best to put the bottles on a shelf.
The shelf can withstand the maximum load 12 kg.
7.2

Connecting the appliance to the mains supply

IMPORTANT
It is imperative that the appliance be earthed according to the directions.
For this purpose, the plug of the connecting cable is provided with the
appropriate contact.
IMPORTANT
Consult a specialist electrician if the plug does not fit into the socket. Do not
try to force the plug into the socket.
IMPORTANT
If you disconnect the appliance from the mains supply, or if a power
outage occurs: wait for 5 minutes before you restart the appliance.
71